Jump to content
SAU Community

Recommended Posts

I have highlighted the operative word. I was merely stating what they are capable of. Sure there are other factors involved but that would be my estimate at their maximum capability with all variables taken into account. Perfect A/F ratio, good base pressure etc etc.

Lipstick on a pig, champ. Even trying to get an accurate look at the capabilities without all of the aspects you failed mention in your post is silly. Imagine it's running a 'heavy' non-oxygenated fuel for a moment, something that burns nice and slow that you can lean out quite a bit and that the base fuel pressure is 75psi.

What are the 1000cc injectors worth in horsepower terms then?

  • Replies 374
  • Created
  • Last Reply

Top Posters In This Topic

DiRT smelled a rat...and indeed his nose has been vindicated...there was something not right and now its been highlighted by the tuner as fact.

Ok...back to discussing this monster R34

My balls are far too small to drive a car that nuts on the road! Yes H@ME the owner certainly is looking over his shoulder for the men in white coats.

Im having trouble working out what is more awesome in this thread...this car...or Johnny's avatar.

Edited by DiRTgarage
DiRT smelled a rat...and indeed his nose has been vindicated...there was something not right and now its been highlighted by the tuner as fact.

Ok...back to discussing this monster R34

My balls are far too small to drive a car that nuts on the road! Yes H@ME the owner certainly is looking over his shoulder for the men in white coats.

Im having trouble working out what is more awesome in this thread...this car...or Johnny's avatar.

i vote for johnnys avatar happening on the bonnet of this r34. win win.

and i take it you mean the injectors infact being different to what was stated as the rat..

regardless tho.. well done trent great work.

i vote for johnnys avatar happening on the bonnet of this r34. win win.

and i take it you mean the injectors infact being different to what was stated as the rat..

regardless tho.. well done trent great work.

yes...rat = injector size that was stated

not anything to do with any person, dyno, drivetrain losses etc

Im tempted to jump on the plane and come down to MAS to see it unleashed.

Lipstick on a pig, champ. Even trying to get an accurate look at the capabilities without all of the aspects you failed mention in your post is silly. Imagine it's running a 'heavy' non-oxygenated fuel for a moment, something that burns nice and slow that you can lean out quite a bit and that the base fuel pressure is 75psi.

What are the 1000cc injectors worth in horsepower terms then?

Ok so you're saying that 1000cc injectors are not capable of supporting 1200 engine hp?

And it's even more silly to start adding variables. Sure, change the fuel, change the base pressure....the 1000cc injector can still do it, just not with that arrangement. So you haven't disproved anything. That's like the guys from Bugatti saying their Veyron can do 400 and you say, oh but can it do it against a head wind with flat tyres? uh ah!.

No it can't do it against a head wind with flat tyres...but it can still do it.

Ok so you're saying that 1000cc injectors are not capable of supporting 1200 engine hp?

Quite the opposite, champ. I see you have misread/misinterpreted what I meant. No matter.

My point was that it's silly to make assumptions and guesstimates without knowing or at least having a pretty bloody good idea at what the other variables are.

so trent what injectors is the car actually running? brand? size?

indy blues, they look the same only the indys have a black body not silver..... 1600cc. i think it is covered on page 6 http://www.skylinesaustralia.com/forums/Tu...html&st=100

Edited by Revhead
indy blues, they look the same only the indys have a black body not silver..... 1600cc. i think it is covered on page 9 or 10??

interesting... wats the idle like.. i assume you'd probaly have troubles getting it down to 1000-1100 range with injectors of that size? than again.. the cams in that thing would be rather large and probaly prefer an idle around the 1200rpm mark?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...