Jump to content
SAU Community

Recommended Posts

Hey guys ,

I was just wondering not so much what car to buy for when i get my red P's but what car options i have as in , non turbo and NA just asking for some good first car suggestions , oh yer im looking for power + not extremely $$$ lets say under 10000$. :cool: Oh yer and to that guy whos name i have forgotten , this isent a pointless post i am asking a question =].

Have you considered, I don't know, checking the web site of the government department that looks after licensing?

This is not what SAU looks like.

2136507155_3b31d1f9ab.jpg

If you can't work out how to Google an answer to what cars you can't buy and what options you don't have, then maybe you shouldn't have a car with "power". There's a reason why they don't want certain people driving certain cars, and from what I've read of your posts so far you're it.

Edited by scathing
Have you considered, I don't know, checking the web site of the government department that looks after licensing?

This is not what SAU looks like.

2136507155_3b31d1f9ab.jpg

If you can't work out how to Google an answer to what cars you can't buy and what options you don't have, then maybe you shouldn't have a car with "power". There's a reason why they don't want certain people driving certain cars, and from what I've read of your posts so far you're it.

post-271-1222441784_thumb.jpg

Edited by rev210

Get a honda, say a prelude VTi-R. You could most likely find one for under 10 grand but in my honest opinion, get a working, reliable car with that 10 grand and wait until you get off your p's and then get any car you want. Everyone else has waited, I'm sure you can too.

Get a honda, say a prelude VTi-R. You could most likely find one for under 10 grand but in my honest opinion, get a working, reliable car with that 10 grand and wait until you get off your p's and then get any car you want. Everyone else has waited, I'm sure you can too.

^^^+1

Good choice! If UR in Sydney (but it looks like it could be Melb), you can have a try of my VTiR 4th Gen (although it ain't 4 sale). They're going for about $8500 now; + or -.

Regards,

Tez

Get a honda, say a prelude VTi-R. You could most likely find one for under 10 grand but in my honest opinion, get a working, reliable car with that 10 grand and wait until you get off your p's and then get any car you want. Everyone else has waited, I'm sure you can too.

Great Car

Great sound when V-Tec hits

Great cornering with 4WS

Hard to find

Hard to break

Hey guys ,

I was just wondering not so much what car to buy for when i get my red P's but what car options i have as in , non turbo and NA just asking for some good first car suggestions , oh yer im looking for power + not extremely $$$ lets say under 10000$. :) Oh yer and to that guy whos name i have forgotten , this isent a pointless post i am asking a question =].

IM JUST ABOUT TO SELL MY R33 SKYLINE.

ITS A BLACK 1995 NON-TURBO COUPE WITH A FEW EXTRAS

so have a budget of 10k and on p-plates.

if your in to skylines you could consider the following.

R31 skyline- Aussie built RB30E has pertental and a grate car for a newby driver IMO.

R32 skyline non turbo- RB25DE bloody hard to find or put a RB30E in it.

R33 skyline non tubro- i dont know much about them

R34 skyline non turbo- may be out of your price range by a few k but still a great car

i know most about the 31 since i owned one for 4 year.

avg price 2-4k for a decent stock example about 5-6k for a moded one.

has a 3L eng and can easerly get some decent power (i had 120rwkw after apx $3000 spent of performance mods in n/a form after a stock 70rwkw).

can find manuals

heaps of performance parts avalerble.

then you would have any n/a 4cyl car or 6cyl car

i.e

corrola

falcon

best bet jump on carsales do a search with your buget for all n/a cars with a max CC of 3500 (3.5L) i think thats the biggest you can go.

this will then give you a list of all current cars that are up to your buget that are non turbo/supercharged and have aeng capacity no bigger then 3.5L

hope this helps

The only problem with buying non turbo 32/33/34's, is that they're a tad on the gutless side. (no offence to the non-turbo boys, I'm sure you've all got your reasons why you own one.)

The kid next to you in the SSS or civic or integra will hand your ass back to you in a second.

A good P plate friendly car list whilst having some enjoyment while driving:

R31 if you like a RWD basher

Pulsar SSS

Integra Type R or Civic Type R

VTiR Prelude

MX-5

Set them up to handle.

Someone close this thread. This topic has been done to death

Keymaker, I would prefer to drive a gutless skyline than a r31 or mx5 i would prefer to walk

Like I said dude:

The only problem with buying non turbo 32/33/34's, is that they're a tad on the gutless side. (no offence to the non-turbo boys, I'm sure you've all got your reasons why you own one.)

The kid next to you in the SSS or civic or integra will hand your ass back to you in a second.

A good P plate friendly car list whilst having some enjoyment while driving:

R31 if you like a RWD basher

Pulsar SSS

Integra Type R or Civic Type R

VTiR Prelude

MX-5

Set them up to handle.

Someone close this thread. This topic has been done to death

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...