Jump to content
SAU Community

Recommended Posts

Hi all, I did a search and this has not been covered as such.

Can anyone suggest that if they used a Broker that they were happy with?

Should I steer clear of anyone in particular?

Are there any horror stories?

We all have to be careful about what is said, but I value everyone's opinion and I have a couple of names, one in Perth and one in Melbourne, but is there anyone else?

Can I find out who you guys used and what you felt about the process?

Link to comment
https://www.sau.com.au/forums/topic/239057-v35-import-brokers/
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

perth one is good :blink:

there is one in adelaide also that is quite helpful. he's on here and will probably see this.

Cheers...

Perhaps he will see this thread and make contact with me... which would be easier for me!!

I used J-Spec for my first V35 and was very happy with the service.

Criag was extremely helpful and very patient.

I'm the kind of customer that wanted the best value car for my money and i wanted it yesterday :-)

The car came in exactly as described, without a hitch in the whole process.

However, my second V35 I bought locally in Australia. I think you'll find there are a lot of nice bargains about the place if you do a bit of a search. There's a few very nice examples up for sale in teh For Sale section, and the bonus is that you get to test drive the car and have it inspected as much as you like.

At the end of the day, if your going for a very unique colour/combo that you can't find here then import, if your going to save thousands then import, if what you want is local and it's only a grand or so more expensive than importing, then i would stay local :-)

Again i was very very happy with J-Spec, and if needed would use them again, but personally nothing beats paying for a car and driving it home the same day.

Cheers

Bobby

Thanks Bobby... I understand all that you said but there is not much locally where I am. In Melbourne there probably is, but I haven't seen much that excites me on the net.

Yeah I agree, i'm from Melb as well and there's nothing that's exciting at all.

All the good ones are either in Sydney or Queensland..

www.autoshop.net.au

www.carmenimports.com.au

www.importautocentre.com.au

www.motorman.com.au

thats a start. I do work for those yards and they have cars in stock. the first three are compliance shops as well . all can source cars from japan.

www.autoshop.net.au

www.carmenimports.com.au

www.importautocentre.com.au

www.motorman.com.au

thats a start. I do work for those yards and they have cars in stock. the first three are compliance shops as well . all can source cars from japan.

Used motorman for my current 35.

Got my last two cars through importautocentre, a Silvia and then a Soarer. Not always the best stock but they do get a few gems in from time to time. Talk directly to Mark (owner) if you can.

Just remember in the end they are all used car salesmen.... (no offense intended to any brokers or salesmen that surf here :O)

I used J-spec for my 2 V35's - Ben is great to deal with and you get lots of photos. Ben is currently working from Japan which always helps.

Also Helps to keep an eye on the Auctions:

https://bzl.cis6200.jp/e/p5_search_result_p...;cc=&hyoka=

Log in "T77043" may need to log in then re-click on the above link.

also check this:

http://www.cyber-mag.com/phpBB2/viewtopic.php?t=944 for all the information you need to calculate costs etc.

BTW I bought my car at 103Yen but by the time it got on the ship the Yen was down to 94 and they actually calculate the import duty on what the Yen is when your car gets on the boat!!!

So things that suck with exchange:

Yen V's Ozzie dollar when you buy

Yen V's Ozzie dollar when your car gets on the boat (Import duties)

USD V's Ozzie dollar when you pay for the shipping as this is calculated in USD!

I would think that it may be cheaper now to buy a car already in Oz than it is to import with the current exchange rates!

Example using this calculator: http://www.cyber-mag.com/importcost.htm (banks take an extra 1.5Yen off of the listed exchange rates)

1,430,000 Yen car at 100 Yen = $14,300 buy and $24,100 Landed and registered average personal import cost 1 to 3 months ago!

1,430,000 Yen car at 66.5 Yen = $21,500 buy and $33,100 Landed and registered average personal import cost at current exchange rates!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...