Jump to content
SAU Community

Performance Decals

R34Liner

By R34Liner,
in New South Wales

 Share

Recommended Posts

JI34GT Collaborator

JI34GT

Posted
Posted
so hang on a minute. your saying that if you have these stickers on the car its ok providing that you have the parts fitted?

More or less, yes. Or they are a official sponsor of some sort.

Japanese parts all come with stickers. In japan it is quite normal to have a shopping list of official parts on your car, but culture there is different, there is less crime(so advertising parts has less worry), no P-plater hoons and car modification is a highly regarded 'career'. it is quite well respected.

It also much cheaper to purchase parts there which make brand name parts more accessible to the public, unlike australia.

However this culture has been bastardized by many people just pointlessly putting stickers everywhere for the sake of it.

I blame the following: Fast and Furious series, Intial D fanboys and MaximumTune3 (2 was ok.:banana:)

GoldZilla Grand Master

GoldZilla

Posted
Posted

Here's what you need - I'm (seriously) thinking of doing something similar if I ever enter my car into our club display at AutoSalon! It should be a nice little piss-take on all the ricers and "all show, no go" kinds of cars you typically see there - Hyundai Accents, Mitsu Mirages and Honda Civic Breezes with $40,000 paint jobs and white (p)leather interiors.

riceeggsbreadmilk.jpg

R34Liner Proficient

R34Liner

Posted
  • Author
Posted
The only sticker you need is one on the side mirrors which state

"objects in this mirror appear to be losing!"

honestly more brands you've got more you are targeted by criminals, cops and teenagers

accctually funny you should mention that because i saw one the other day it said "objects in mirror are getting further away" never seen them sold...even searched for it...nothing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ggub
      WTB RB25 Gearbox NSW / central west

      By ggub · Posted

      Agree with Rob. I recently did mine and replacing with a brand new unit made the most sense compared with rebuilding my existing gearbox.
    • GTSBoy
      Rb25 trigger kit and timing misalignment

      By GTSBoy · Posted

      Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • joshuaho96
      R-chassis INNER tie rod torque spec?

      By joshuaho96 · Posted

      I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • joshuaho96
      Question about BoV on RB25DET NEO

      By joshuaho96 · Posted

      Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • drifter17a
      Rb25 trigger kit and timing misalignment

      By drifter17a · Posted

      Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
×
×
  • Create New...