Jump to content
SAU Community

Recommended Posts

And he explained to me that some people need to make do with what they can afford, people in Porsches, Ferraris and Lambos etc probly look at our cars and think the exact same things we think when we see a riced up econobox(be it whatever car).

yeah true...

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i said they need rebuild's, i didn't mean stock h22a's. i mean't the spoon and mugen motors, or any other engine, not just honda, that can rev to double digits. the poor internals must be going through hell.

however,

i'll probly try a prelude, integra, or civic before i go to a GTR.

I consider myself very fortunate to be able to have both (VTiR + GT-R).

Two totally different cars; and for two different reasons...

But I can get out of one and into the other, without having to mentally readjust or feel awkward = Balance.

Tez :P

You need to go in an NSX-R then.

Quicker around a track, and from a standing 1/4 than an R34 GTR.

yea i know nsx-r is very quick especially around a track, but sorry i don't have any spot for honda, though back in my home country my girfriend's dad owns a Honda dealership.. if i'd pick japanese sport car, i'd pick nissan no doubt.

nothing wrong with hondas, i had a civic for 2 years..and it never broke down once, even with me thrashing the shit out of it.

sure it was a bit gutless as it was non-vtec, but i could corner in that harder with shitty tyres, stock susp and bulk body roll than in my skyline with coilovers.

many R model hondas would keep up, if not chop, many stock skylines on here. having said that, i chopped a brand new civic type R very hard recently lol

saying vtecs are gutless and torqueless makes you as much as a fool as the honda boy who bragging bout vtec in the vtir

The first time I hit VTEC in dad's prelude I was amazed at how much quicker it went once the high lift cams came in.

The second time I hit VTEC I was amazed at how f**king slow the car was up until that point!

But do you know what the best thing about Hondas is? It means fewer wankers driving skylines :(

*zips up flame suit* ah I'm just kidding.. I reckon an S2000 would be an awesome car. I was also a fan of the Integra Type R for a while, except for the FWD factor..

yer vtec = shit... right :)

i forget which thread it was where a "fully" tuned rb30 was makin like 140ishkw with stupidly high comp n all...

meanwhile a similiarly spec'd honda b18c makes over 150fwkw...

oh n then theres that turbo crx frmo quite a few years ago.. i think his plates were UCACRX makin over 400fwkw on his "shit" b18c ....

then theres this shitbox

slow as yer.. the yanks r runnin low 8's high 7's...

yer i can see how vtecs and hondas r shit... :bunny:

every engine/car is as good as the person who builds it...

I think the wind has gone from the sails. Lets let this thread die. As the SAU community has failed to bring a good argument to light. bar " Hondas Suck".

And your right Kinks, the more people that drive hondas, the less chance of some Skyline N00b attempting to drift his mad fast RB20det on a street and killing a real enthusiast.

I have nothing against VTEC or Honda.. but it pisses me off when ppl say that their stock honda integra type R can beat the crap out of my gtr that has GT2860-5's in it.. Do some research before you make ridiculous claims =/ Sure VTEC can work, and it has its uses, but that doesn't make it the best car in the world that can beat everyone..

Actually I think i just hate ppl who talk crap.. has nothing to do with VTEC :)

I like hondas :ermm:

I like skylines :(

But how do you compare one with a turbo and without?

People say that a nissan without a turbo is nothing.

If we remvoe the turbo out of a GTS-T, or put it against a GTS/GT(34), how will a vtec go?

Not fair.

Love nissan and honda.

I like any engine that delivers the goods. I don't particularly care if its a Nissan a Holden or a Daihatsu.

If a four cylinder with clever valve and cam timing can get me excited and make me want to drive and drive fast then congratulations to the engine designers. Job well done.

I recently drove a CRX with a B16C I can honestly say it was a blast.

Was it the same as driving a four hundred horsepower V8 hotrod? No. Was it the same as driving a turbocharged skyline? Definitely not. Nor was it comparable to my current NA. Not because the VTEC powered car was good or bad but because comparing these engines is like comparing chalk and cheese.

The only bad thing about Honda's VTEC engines are the fanboys.

For those who still think the VTEC engines are crap I would also like to do a quick engine efficiency calculation (aka brake mean efficiency pressure):

For those that don't know BMEP is a measure of design optimisation by calculating the average cylinder pressure during combustion. The higher the number the more efficient the design.

Where BMEP= kW x 1200 / litres x RPM

Stock R34 GT N/A

147 kW x 1200 / 2.5 x 6000 = 176400 / 15000

Therefore BMEP = 11.76 bar

Stock 2001 Integra Type R 2.0 litre VTEC

147 kW x 1200 / 2.0 x 7400 = 176400 / 14800

Therefore BMEP = 11.91 bar

So the R34 has an extra 500cc but it is still not quite as efficient as the Integra's engine. Interesting hey?

is it hondas signature for all fwd cars?

Also, does vtec kick in at 5000rpm+ I thought vtec/na was suppose to eliminate any lag.

With this a turbo would be added and then include vtec would make a lot less turbo lag.

No idea.

Edited by Owgasm

Not sure what your saying there, but they make RWD too such as the S2000 and NSX.

What im saying is that a 1.8 or 2L RWD Integra or Prelude would probably be looked upon more desirably in a RWD platform

Edited by MintR33

on another note.. vtec wasnt introduce to reduce "lag"

its for fuel economy... the theory was that that under 6k u can save lots of fuel by running a small life and duration cam

while when u needed it to move then it would switch to a much more agressive and less fuel economic setting and produce the power u need to get moving quickly without a turbo

Actually, it wasn't designed to be firm and noisy. Surely the design objectives were to make it handle well and perform well on just 1.8 litres. Stiffening the suspension so much and removing the sound deadening turned it into a tiresome road car even though it was good when you occasionally went to the track.

Wot? We are talking about the Type-R, right? The "race car for the road" models? Of course it was designed to be firm and noisy. Its not like they accidentally seam welded the chassis and forgot to include sound deadening in the bill of materials.

The VTiR was designed to "handle well and perform well on just 1.8L" while still being a comfortable streeter.

Surely, if you owned one and you're an enthusiast you'd know what the design brief for any proper Type-R model is (i.e. not the shitty DC5 we got foisted upon us, or the CTRs the Poms made) to be a road car that is trackable off the showroom floor.

Quote from a guy who went from a peaky S2000 to a torquey 350Z in regards to how the cars drive.

Going from Honda to Nissan i would dare say it will be hard to get back into another honda unless its an NSX or worked S2000.

I am really enjoying the extra usable torque of the 350z and this has sort of lead me on the path to wanting something quicker....

I actually look back now and can see why guys who drive nissans bag out Hondas. hehe

Nuff said.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...