Jump to content
SAU Community

R32 Turbo Sound Missing

heaveyfoot_ skyliner

By heaveyfoot_ skyliner,
in General Maintenance

 Share

Recommended Posts

tryandcatchme Collaborator

tryandcatchme

Posted
Posted

i lost my t/spool sound the other week,while playing with my vacuum lines,i swapped some around and found what ever i did it made my bov sound louder,but lost my spool sound,after changing over,it came back,so i found out that a change in the pressure can do wonders. Didnt notice change in power,turb still spooled over, not sure what damage etc in long run could have done,but it works how its supposed to so thats all im worried bout now

mad082 Grand Master

mad082

Posted
Posted

the only way a vaccum line can alter the spool sound is if it is making the wastegate stay open instead of closing (so exhaust air isn't making the turbo spool), and if that was the case you wouldn't have boost.

i'm guessing your spooling noise possibly isn't actually your spooling noise but a leak (such as bov not closing 100%) especially if what you did made the bov louder (you probably made the bov close properly).

what pod filter are you using?

  • 2 months later...
heaveyfoot_ skyliner Enthusiast

heaveyfoot_ skyliner

Posted
  • Author
Posted
the only way a vaccum line can alter the spool sound is if it is making the wastegate stay open instead of closing (so exhaust air isn't making the turbo spool), and if that was the case you wouldn't have boost.

i'm guessing your spooling noise possibly isn't actually your spooling noise but a leak (such as bov not closing 100%) especially if what you did made the bov louder (you probably made the bov close properly).

what pod filter are you using?

hi mate thnks for the reply

its got no pod filter

one more question thing they say its a faulty turbo so is it ok if keep driving the r32 ? or is there any option to remove the turbo and drive it without the turbo like non turbo or fit a new non turbo engine in the car

BeEnAr Experienced

BeEnAr

Posted
Posted

Hey mate don't listen to all the people putting you down.

Just take your working/stuffed turbo off and fit one of these suckers!!

post-50346-1232350147_thumb.jpg

1. Improved fuel economy

2. Instant increase in engine power?

3. Reduction in carbon accumulation to your engine

4.Minimized air pollution

5.Enhanced throttle response and acceleration

6.Easy to install,DIY.

post-50346-1232350230_thumb.jpg

Super Spiral Turbo Ventilator creates a vortex air flow to imporve air & fuel mixture? enhancing your engine's performance.It reduces the carbon accumulation in the engine and substantially increases the horsepower to your engine.

Super Spiral Turbo Ventilator blades are made of advanced precision bearing technology (running up to 30,000RPM). Yep The blades are made out of bearing technology!!

Aluminum alloy gravity diecasting design is not only anti-rust, but also has the ability to match your high-revving engine. The blades have special angles to promote extra air flow to the inlet manifold and assist in providing better engine combustion. Experience strong torque during low to medium RPM ranges but also extreme horsepower at higher engine revolutions.

Furthermore, it is environment friendly and greatly increases performance efficiency.

The products can be installed to gasoline & diesel cars, as long as there is

the inlet pipe on the air inlet of the throttle.

HAHAHAHAHA!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...