Jump to content
SAU Community

Recommended Posts

Hey just a few quick questions RE: lag..

I recently built my gtr up pretty well and now want to put some power through it.. I'm sticking with the twin turbo setup and am currently tossing up between 2860-7's or 2860-t5's/2530's. I just want to know the difference between 290-310kw's and 340-370kw's..

fastest car i've ever been in is a mates 32 gtr which had n1's and around 260kw.. Anyway basically, is there a way sum1 can compare this to a r32, with an rb20 powered engine? I've been in a few 220/230kw ones and used to drive a 165/180kw one (r34 turbo).. As it is currently a mates 170/180kw gts-t with a 34 turbo on it keeps up with me (not off the line obviously) the GTR running 11psi so i'm not so sure it will be a very accurate way of comparing it but.. What i'm wanting to know is more the lag difference, will the 50kw difference in a gts-t with mods listed be the same as a 50kw difference in a gtr with mods lifted, and at higher power lvls?

Will 350kw be crazily laggy? As in no more cornering? Because i don't want to just go 300kw's after having spent all that cashola on a fair decent rebuild, but if it's gonna take the fun out of driving it, and it's gonna make accelerating out of corners too difficult i might have to..

Also, gtr fuel pumps aren't good for that kind of power ay?

Cheers

As i posted in another thread

-7s/GT-SS/R31N1 - 300-330rwkw

-5/2530 - 360-400rwkw

-7s are the best choice for a street car. responsive as stock, with much more meaty midrange due to the added boost you can run

Makes your car feel like a big 4ltr N/A, basically power everywhere.

oh wow really, didn't think they'd even be close to as responsive as the stock ones :( Stock ones are as responsive as a stock rb20 i'd say so that's sweet, the 2530's wouldn't be much less responsive than one of those 220kw 32's

I've seen some people with GT-SS's and -7's only come up with 290/300kw and was a bit worried, 2530's are a pretty safe 350kw bet, theres nothing in between the gtss's/-7's and the 2530/-5's?

Ok, a real noob question but i am what does the -7 mean? As in 2871R -7 or -5 or -10. Looking at a few turbo's at the moment and coming across all these minus numbers....

hey mate,

Im in the same boat as you!! lol gets confusing hey but this is taken from a trader on here

Garrett GT2860R-7 (R34 N1)

Power Rating (Max): 310hp (620hp the pair)

Details: This turbocharger set-up are OE (original equipment) from the Nissan Skyline R34 GTR N1. They come with adjustable garret actuators.

Garrett GT2860R-5 (HKS GT-SS Equivalents)

Power Rating (Max): 360hp each (720hp the pair)

Details: This turbocharger set-up have extremely similar specifications to the HKS GT2530. They come with adjustable garret actuators.

Garrett GT2860R-10 (HKS GT-RS Equivalents)

Power Rating (Max): 460hp each (920hp the pair)

Details: This turbocharger set-up have extremely similar specifications to the HKS GT-RS, these are a serious set-up.

Edited by Adz2332

Yeh like he said except i think the 2860-7's i'm talking about won't be the nissan OEM ones but rebuilt ones.. pretty sure thats what the disco potato ones are anyway, anyone know if theres a turbo size in between the -7's and the 2860-5's/2530?

GTAAAH

Get either the GT-SS or 2530's (or you want the cheaper alternative the 2860R 5 or 7). both will be great - I have a set of REAL HKS 2530's and they respond great :devil:

my nismo pump and stock injectors, AFM's ECU have made just shy of 300kw@w @ 18psi.

you can't lose!

I can't quite think of a much gayer goal than that. Please explain?!

lol :devil:

Well what doesnt make sense?

It feels like a much bigger motor.

Doesnt feel like a 2.6ltr turbo. See you get in a car with a turbo that comes on say what, 4000rpm. You know its got a turbo.

GT-SS/-7/R34N1 come on so smooth and early that you would think its just a big torqued N/A motor.

Literally there is power everywhere in every gear and you don't really have to 'wait' for boost like a bigger turbo setup.

Downgear off cruise, press pedal, off you go as boost is just 'there'. Its nothing like my GT30 setup, yet makes about the same power.

I mean if you want a peaky laggy setup to 'know' you've got a turbo, good for you... i enjoy my response :D

lol :devil:

Well what doesnt make sense?

It feels like a much bigger motor.

Doesnt feel like a 2.6ltr turbo. See you get in a car with a turbo that comes on say what, 4000rpm. You know its got a turbo.

GT-SS/-7/R34N1 come on so smooth and early that you would think its just a big torqued N/A motor.

Literally there is power everywhere in every gear and you don't really have to 'wait' for boost like a bigger turbo setup.

Downgear off cruise, press pedal, off you go as boost is just 'there'. Its nothing like my GT30 setup, yet makes about the same power.

I mean if you want a peaky laggy setup to 'know' you've got a turbo, good for you... i enjoy my response :D

And that's the advantage of the 3L and a big turbo...

Hit the throttle, while waiting for boost, you have torque, when it comes on boost... GONE!!!

Ash, your car is RWD isnt it? just throw the 26 head on a 30 bottom end with a set of -5's. It should be just as responsive as the 26 with the -7's and it would be hard to spot the difference between the two engines once in the engine bay.

Yeah, wasn't interested in RB30 to be honest, restamping blocks illegally with incorrect engine numbers etc.

Happy with RB26 (plus id rather use a racepace 2.6ltr block with all the dev work done to it)

Just my own choice really end of the day as i picked up gt-ss's at a very good price when the yen was decent 2yrs ago

:D

I've looked in to the legality issues sought advice etc...

Larger turbo's, ECU, bigger injectors are not any less illegal than a larger motor. At the end of the day HP is HP.

If the car is insured and in a questionable accident suspected due to speed/hooning. The aftermarket ecu & larger turbo's will be found and insurance will be void as a result you may be up for the cost of car/property and bodily damage involved. Big $$ and thats still with the 2.6ltr.

When listing mods with the insurance company there is fine print stating it is on onus of your self to ensure mods listed are legal. If they are not well .... Insurance void.

Then there's the bodily insurance that is part of your registration. Illegal mods and insurance is void. Typically mods are not looked at unless it is suspected excessive speed has possibly attributed to the accident.

In short.. They won't go any easier on you just because its a 2.6ltr. Go the 3ltr, full crank collar, forged rods, pistons and ATI balancer (all the bits youd shove in to a tough rb26 anyway) and it will see 8-8.5k reliably with a hell of a lot more low and mid range which allows the sizing of a considerably larger turbo before drive ability is negatively impacted.

Good thing i wont have a problem with my speeding being the cause in the instance of a claim, i'm behaved when it comes to things like that :P

Anyway, this isn't a thread about me or legalities of upgrades... back to the main point :D

Think of the 50kw extra as lots of broken g/box's and front diffs etc. For half a second or one down the quarter for example the ongoing cost of 50kw is huge. I think drag is geh but its an example. A gtr with just under 300rwkw will go all day everyday on stock fuel pump/cams/inj/afm's/radiator etc. A gtr with 370rwkw break drivelines and with the extra power you need bigger inj/fuel pump/afm's/brakes/oil cooler/radiators and lots more to use it to its full potential and they cost big $.

Its not a matter of 50rwkw its the parts that are required to make the power plus the parts to keep it going.

I have 280rwkw guessed in my car reduced from 295rwkw as the inj were maxed and I turned the boost down to keep it safe. Its all you really need on the street or track until you learn how to drive a gtr properly and once you can drive it hard, your continually learn more about how the car handles instead of relying on power. Spend the extra money on good suspension and a 300rwkw will beat a 370rwkw on the track or street. Better off driving it with less power instead of working to pay for it to sit in a workshop and never driving it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...