Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

clutch type diffs need an LSD oil. The standard R33 diff does not need an LSD oil because the viscous centre is a sealed unit.

LSD oil has friction modifiers so the wet clutch works properly, if you fill with a normal oil your diff will shudder.

Check to see if that Castrol one is suitable for limited slip differentials.

Hard to get, not even sure what grade or weight, I'd need the brand grade and weight first. ie Motul Gear Oil 90 PA SAE90 or Motul Gear Competition 75W140????

I'm thinking that the Gear Competition would be the go, but would like to be sure, tearing the teeth off a diff is NOT on my list of things to do..........lol

  • 2 years later...

Can anyone tell me the capacity of a Nismo diff.

A std diff is 1.8 litres, i just did my Nismo and it only took 1.35 litres and thats after I double checked!!

It flowed out the fill hole twice so it has to be full, but I'd like to have my figures confirmed - peace of mind and all that.

Can anyone tell me the capacity of a Nismo diff.

A std diff is 1.8 litres, i just did my Nismo and it only took 1.35 litres and thats after I double checked!!

It flowed out the fill hole twice so it has to be full, but I'd like to have my figures confirmed - peace of mind and all that.

Since when is a std diff 1.8? 1.3 is on the money unless you have an extended backing plate (trust)

80-250 doesn't sound right, didn't think you could get the viscosities that far apart in an oil??? Maybe 80w150????

http://www.otomoto.com.au/osgiken/superlock.htm

have a look at that... ( i double checked too.. i did read it correctly!) lol

Since when is a std diff 1.8? 1.3 is on the money unless you have an extended backing plate (trust)

Sorry, i went off what a certain well respected shop told me when they looked it up - when i was buying the oil.... pretty sure they said 1.8 - but it could be my memory, maybe they said 1.3 - I can't be 100% sure. Then I didn't look it up anywhere to check either.

BTW I just did a 1500km weekend and the Motul Gear Competition 75W140 worked fine, no problems.

And EJD, apologies, 80w250 it is>>>sounds like a good broad viscocity base, would handle a lot of situations.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...