Jump to content
SAU Community

Recommended Posts

Ok so i have gone out and ordered a full Impul kit with a carbon bonnet with a Ztune style vent in it, My question is has any-1 got a pic of a white R34 with a carbon bonnet or have a R34 with a carbon bonnet that could post some pics up for me :( as im alittle un decided if i want the boot aswell, also looking into the carbon eyelids if any-1 has a pic of with a carbon bonnet that would be great

post-29112-1225608758_thumb.jpg

post-29112-1225608743_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/
Share on other sites

So none in this thread?

http://www.skylinesaustralia.com/forums/R3...se-t146573.html

There was definately one posted of a White 34 with a carbon bonnet only days ago... look for the one with the nismo kit like mine.

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241590
Share on other sites

So none in this thread?

http://www.skylinesaustralia.com/forums/R3...se-t146573.html

There was definately one posted of a White 34 with a carbon bonnet only days ago... look for the one with the nismo kit like mine.

out of all those pages not one with a boot :down:

thanks for the link thoe howie

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241682
Share on other sites

That's cool. One person I know who had the carbon bonnet and carbon boot, was Phuman's old white R34. If you do a search on previous Adelaide Autosalons or Small Car Sundays you should find his car there. Personally I think the carbon boot looks out of place if you don't paint the top half black (panda style).

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4241722
Share on other sites

Here's a couple of pics of my cars bonnet. I was thinking of getting a carbon bootlid but it may look a little too much.

I also have a set of carbon eyelids but i didn't put them on because they looked a bit naff. So i'm either painting them white or selling them for a carton.

post-17465-1225956878_thumb.jpg

post-17465-1225956983_thumb.jpg

Edited by [ANGRY13]
Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4245268
Share on other sites

hey i got the same bonnet and it looks great!!!! the only issue with it is when it rains alot water gets into the coilpacks making the car run like sh*t untill it drys out

that's what i was thinking about aswell :D i dont think the coil packs will be to bad with the NEO engine thoe

We have R34 bootlids in carbon, not sure what the difference in the sedan to coupe is though.

and cant wait till it comes in ;)

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4252758
Share on other sites

hey i got the same bonnet and it looks great!!!! the only issue with it is when it rains alot water gets into the coilpacks making the car run like sh*t untill it drys out

doesnt it come with, or cant you get a sort of backing plate for under the vents for those rainy days? im sure i've read about this before with vented bonnets including the z-tune style one

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4253037
Share on other sites

doesnt it come with, or cant you get a sort of backing plate for under the vents for those rainy days? im sure i've read about this before with vented bonnets including the z-tune style one

would be great if you could find that again :wub: i suppose it would't be to hard to make something up like that thoe ;)

Link to comment
https://www.sau.com.au/forums/topic/242925-r34-carbon-boot/#findComment-4253481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...