Jump to content
SAU Community

Recommended Posts

I going to be taking the head off next week and I might as well get a thicker head gasket for my R33..

My current mods are Power FC, HKS2530kai turbo, Z32 AFM, FMIC, Custom TuneAgent Exhaust manifold and split dump pipe 3", Bosche 023 fuel pump, Im running around 18psi boost, and I wanna be on the safe side and get a thicker head gasket.

What size/type is recommended to suit an RB25DET?

Also, are there any gasket kits available for an RB25DET, including intake plenum gasket etc??

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/243921-head-gasket-question-for-r33/
Share on other sites

hi mate,

a 86mm would probably be best, by 1.5mm

Im going to use a 87mm x 1.2mm head gasket

you can buy genuine complete nissan gasket kits for around $200

for example, lewis engines sell head gaskets and gasket kits http://www.lewisengines.com.au/category2_3.htm

although better prices can be found on the net

example : http://shop.rawbrokerage.com/category.sc?categoryId=20

edit: I ended up buying a heap of gear for the head from Erics Performance Parts, usa ebay, when the usa $ was 1.03$ to the aussie dollar so made it quite a cheap buy-up exercise

mind you, my complete rb25det head job will set me back around $4500

I wouldnt go bigger with that setup. All you will do is lose a little response.

But if you want to upgrade the gasket to a metal one you cant go past Cometic for Price and quality.

I would recommend the 1.2 or 1.3mm.

As for gasket kits i just bought one from Andrew at Kudos Motorsport here on the forum, cheapest ive found.

yep Cometic is the brand name Ive chosen for the gasket set(s)

good pricing and excellent quality in the flesh.

must admit I stole that website link from ntsky, =) always have a look there, nice site

you can read about my head work here:

http://www.skylinesaustralia.com/forums/He...&hl=tangles

Thanks for the prompt reply guys, Tangles thats a nice list of items you have there for your head work. :P

I think I'll end up going with the 1.2mm by 86mm.

Another thing that I was told was that I might need to get new head bolts as the old ones might be stretched at wont tension properly once put back in place? Is this true? Or do I just re-use the standard/old ones?

Simple answer, no.

Taking the head off and taking the engine out are two different ball games. Also its a waste of money for the power your going to be pushing, stock internals will be fine.

So i would have to get the engine out, the RB25 oil sump isnt bolted on the bottom?

out of curiosity why is the head coming off?

what power is it pushing?

Long story short, there is a hole behind one of the exhaust manifold studs and its leaking oil.. the reason the hole is there is because a mechanic drilled through there to get a broken stud out and ended up drilling through the block into the oil gallery, so im taking it off to get it welded as i have tried to use sealers and everything else and nothing has worked so far..

so i thought i might as well change the head gasket along with the rest of the intake gaskets etc. while the head is off..

power at the moment is 230rwkw @ 20psi with HKS2530kai, this is why im getting a thicker metal head gasket as well..

Edited by EVL-R33
So i would have to get the engine out, the RB25 oil sump isnt bolted on the bottom?

You want to build a motor with the block still in the car....

Also no need to go a thicker metal head gasket, your choice though. When i take my head off in a few weeks im just replacing mine with the standard nissan one in the engine gasket kit. No reason to lower compression at these power levels.

incredible, i know a guy that had the same thing happen, re the exhaust studs/drilling into head.

however he made the mechanic pay for the f**kup, took it to another mechanic and got the first one to pick up the tab for head removal and all other associated repairs/parts.

mistakes happen, but the story i got told was it was a bit of a mess once he was done.

You want to build a motor with the block still in the car....

Also no need to go a thicker metal head gasket, your choice though. When i take my head off in a few weeks im just replacing mine with the standard nissan one in the engine gasket kit. No reason to lower compression at these power levels.

The place I will be putting in the pistons has a hoist so if the sump comes off, it will save some time and i wont have to get the engine out... but if the RB25 sumps dont come off then obviously i will have to take the engine out..

I was told differently, to actually lower the compression a little so i would be able to run more boost (20-25psi) because these turbos can produce it and my current application can handle it. The gasket which i ordered is a 1.2mm by 87mm, so its not too thick...

incredible, i know a guy that had the same thing happen, re the exhaust studs/drilling into head.

however he made the mechanic pay for the f**kup, took it to another mechanic and got the first one to pick up the tab for head removal and all other associated repairs/parts.

mistakes happen, but the story i got told was it was a bit of a mess once he was done.

wow, so im not the only one that it has happened to... the mechanic has paid for his mistakes which was good.

do you know how he ended up fixing his? or did he actually get it welded like what im going to do?

PS> Sorry for double posting, but i dont know how to delete posts on here..

Edited by EVL-R33
Not sure if a 2530 will be much efficient mast 20psi.....

not really big power figures im after at the moment, just wanna have peace of mind, running over 20psi with a stock head gasket is a bit scary at times... i will be in the market for a bigger turbo in the next couple of months anyways...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...