Jump to content
SAU Community

Recommended Posts

Hi all, yep a pixel car thread. I've done the search and they are not active anymore, Hence this thread. This is just something i do in my spare time.(started 2 weeks ago)

this is base i use.

vrpw7b.png

(please credit if your using someone else work/base)

I use this gtr base and start downgrading it back to a Gtst. I have to get the front bar edited and hopefully put an intercooler in then window tinting etc..

so if anyone is into pixel cars as well do share your work. I find this very time consuming but the final piece is pretty worth it.

link to pixel car website pixelcars.com

Jenno.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/244077-the-pixel-car-thread/
Share on other sites

that front bar but without the yellow fog lights

post-40562-1226438523_thumb.jpg

i want to try my hand at this as well, any recommended tuts, i've found a few.

this might end up like that mini-car thread we had goin a little while ago lol, was funny stuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...