Jump to content
SAU Community

Recommended Posts

Hey guys i just fitted FMIC to my r33 gtst but now when its starts comin onto boost it splutters for a bit and backfires (it makes a big bang) the only thing i could think off was the line from the wastegate that went to the standard intercooler pipe has no where to go now so i tried blocking it and it still does it can anyone help pls

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/245242-fitted-new-front-mount/
Share on other sites

its only got zorst, bov and now the fmic. ive adjusted the blow off valve its one of them turbo smart ones with the 2 trumpets.and seems better but im not 100% the police where out so i cldnt do to much and i blew one of the pipes off (scared the S#@t outta me sounded like a gun shot)

Ill take it to my mechanic 2morrow to get the nipple fitted at the moment ive blocked it does this mean that it will be +++++ boost

i also have a PFC but it hasnt been hooked up yet wld it hurt to hook that up and take it for a drive with the base map just to see what comes up?

thanks for the help :ph34r:

Your spluttering would've been because one of your clamps on a join wasn't done up properly, hence why it blew off. It would've been leaking out air under pressure, thus the car is adding fuel for XX amount of air, but only X is making it to the motor....thus overfueling.

And you need that hose that goes to the actuator to have a pressure signal, cos if you don't, the wastegate won't open.....

Hang on a minute guys...he is talking about a line from the waste gate that has no where to go!!!

The only line I can think of on the stock waste gate which just happens to be a VERY VERY IMPORTANT one...It is the actuator feedback line!!

Dood it sounds like you are hitting airflow cut because your waste gate is just not functioning at all because it is getting zero boost feedback. This is bad!! It is NOT a tuning issue, it is a functionality issue.

Dont drive your car like this (off boost is ok only if you have too). On boost you have a fair chance stuffing your turbo because atm the boost is not controlled...

You need to plumb that line back into anywhere between you compressor outlet and your throttle body...doesn't really matter where.

LOL... if it's a skyline and it backfires, it must be afm/spark/leak/coil related.

I wonder if other people actually read this part of his post..

the line from the wastegate that went to the standard intercooler pipe has no where to go now so i tried blocking it and it still does it

:)

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

I think you mean cough,splutter,bang as the exhaust wheel leaves the equation

Hang on a minute guys...he is talking about a line from the waste gate that has no where to go!!!

The only line I can think of on the stock waste gate which just happens to be a VERY VERY IMPORTANT one...It is the actuator feedback line!!

Dood it sounds like you are hitting airflow cut because your waste gate is just not functioning at all because it is getting zero boost feedback. This is bad!! It is NOT a tuning issue, it is a functionality issue.

Dont drive your car like this (off boost is ok only if you have too). On boost you have a fair chance stuffing your turbo because atm the boost is not controlled...

You need to plumb that line back into anywhere between you compressor outlet and your throttle body...doesn't really matter where.

LOL... if it's a skyline and it backfires, it must be afm/spark/leak/coil related.

I wonder if other people actually read this part of his post..

:blink:

the above = unlimited boost.

Stock ECU R33 with unlimited boost = cough, splutter, backfire at about 11psi (well apart from **RB3530** - his one is a little special)

I wonder if other people actually read this part of his post..

its only got zorst, bov and now the fmic. ive adjusted the blow off valve its one of them turbo smart ones with the 2 trumpets.and seems better but im not 100% the police where out so i cldnt do to much and i blew one of the pipes off (scared the S#@t outta me sounded like a gun shot)

Ill take it to my mechanic 2morrow to get the nipple fitted at the moment ive blocked it does this mean that it will be +++++ boost

i also have a PFC but it hasnt been hooked up yet wld it hurt to hook that up and take it for a drive with the base map just to see what comes up?

thanks for the help :D

It was a boost leak because a clamp/join wasn't properly fitted, that is why the pipe blew off.

The cough splutter backfire is from overfuelling because it's not receiving all the air that was metered.

But yes, the actuator line is an important one. Get a pressure signal to it asap to avoid turbo failure.

Edited by KeyMaker

problem solved i got a nipple put on to the intake pipe for the actuator hose to go back on apparantly without that hose the car was basically running as much boost as it could lucky i didnt i didnt thrash it :blink:

Thanks for the help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...