Jump to content
SAU Community

Recommended Posts

Hi all,

Would like to start a group buy on TOMEI Cam Gears for RB20/25/26.

If i can get enough interest ill get one going.

post-32255-1227181745_thumb.jpg (pic for illustration purpose only,these are EVO cam gears)

Here is a bit of a run down:

Super lightweight 100% Duralumin

Duralumin is alloy of aluminum (over 90%) with copper (about 4%), magnesium (0.5%-1%), and manganese (less than l%). Before a final heat treatment the alloy is ductile and malleable; after heat treatment a reaction between the aluminum and magnesium produces increased hardness and tensile strength. Because of its lightness and other desirable physical properties, duralumin is widely used in the aircraft industry. material of both pulley part of an outer, and an inner plate portion to realize super-lightweight body.

Super-high durability

By coating with hard almite on the surface, durability of the pulley have raised dramatically. It can easily be used for the drag racing cars that exceed 1000horse power and 10000RPM.

Designed only for each IN and EX pulleys

With individual design of IN and EX, the adjustment part of both IN and EX pulley comes to its top when the engines TDC for easier valve timing adjustment.

Extreme high precision

Pulley and inner plate were curved from material. Especially for pulley gear, we succeeded in giving extreme high precision to its shape that realizes certain transfer of drive from timing belt.

Works and looks great in engine room

We choose duralumin as the material and give it an almite coating. Also, we designed the pulley for the better operation. The color of the pulley is showing the strength of hard almite.

Prices will be $150 each plus $20 shipping or

$280 a set plus $20 shipping.

If you are interested in purchasing please post in here.

:blink:

Link to comment
https://www.sau.com.au/forums/topic/245746-tomei-cam-gears/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

A whole batch of cam gears will be ordered in the new year for this group buy.

Ill open the group buy then and will be accepting orders and payments.

Thanks for all of the interest,

Link to comment
https://www.sau.com.au/forums/topic/245746-tomei-cam-gears/#findComment-4302792
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...