Jump to content
SAU Community

How To Prep For Drags In My Gtr?.....im I 1st Timer...


Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

limiter launch ftw but still use the handbrake, ive seen a few breakages from just dropping clutch, when using the handbrake u take any 'slack' out of your driveline, also helps u come onto boost before launching, so as said before line up, pull on handbrake keeping hand on the handbrake slowly rev and release clutch till you feel it start to bite, then foot flat drop handbrake n clutch!!

Cheers for all the tips.

For my 265 is 22psi all round a good starting point?.....i done a few launches, at 4000 i get huge bog...6000-7000rpm launches seem just right though and it bites and im away

also i have some alreasy stiff coilover suspension...its damper adj and the damper setting is around half way...should i adjust for the drags?

Is it bad to have the accelerator floored the whole time? ie not taking your foot off during gear shifts?...

....one thing id like to say....after a few launches i could really smell my clutch...is this normal?

Thanks to all!...im gnna practise Handbrake techniques tommorow:)

I'd be interested in tips for my r33 gtst also gonna be a first timer at WSID next month. I know if i do rev limiter launches i am gonna fire the tyres. 5000 rpm be alrght with the hand brake ??

I like Martin Donnon's list (happy 40th btw Martin) except for the "sit on the limiter for five seconds" one. What a steaming pile of turd. Limiter launches don't need a whole five seconds on it. WTF?!

I like Martin Donnon's list (happy 40th btw Martin) except for the "sit on the limiter for five seconds" one. What a steaming pile of turd. Limiter launches don't need a whole five seconds on it. WTF?!

Did you not know that he sells RB oil pumps ?

2 seconds or 3 'pops' whichever comes 1st for me...best of 1.41 on radials tells me my method works.

Edited by DiRTgarage
Did you not know that he sells RB oil pumps ?

LOL! That explains it then.

2 seconds or 3 'pops' whichever comes 1st for me...best of 1.41 on radials tells me my method works.

Listen to this man. He knows stuff.

Come on HPI - its the publication everyone needs to read and accept as gospel because all we are here are internet experts

Just like magazine experts...

I qualify for both categories so tell me what sort of a fcukwit I am?!!?!?

LOL!

Havent read the thread but stocko suspension is a good idea, stiff coilovers arnt going to be doing you any favours

not really...but are stockers are adequate.

ive tried...stock...revalved stock (drag set-up 90/10's in the front and 60/40's in the rear) and HKS circuit coilovers...what worked the best?

The HKS items.

Mark Jacobsen ran KYB circuit coilovers all the way up to low 8's and 60'd in the low 1.3's with them on radials...try doing that on stockers.

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...