Jump to content
SAU Community

Recommended Posts

Looking at the engine bay photos from SMASA earlier this year can definitely see a big massive silver snail sitting on the passenger side of the engine.

Gonna be a fun trip getting ready for Regency then

I got done about a month ago now...

Up through Henley Beach Road at about 8pm.. heading to the beach with the missus actually.

Undercover was sitting on top of the bridge near South Road/Henley Beach. I wasnt in a hurry, I looked in my mirror saw someone turn in behind me.. Next thing I know they are right up my ass, pull across to the right of me, get next to my door.. Slam on the brakes and pull in behind again.. Wonder what the 4 cars behind me were thinking. :P

Anywho, basically said to me that reason pulled you over was for suspension.. not suprised, put it back in for AJP never took it out. Only the front though.. Continued to ask me questions about did I know anything about cars... blah blah blah, he even said to me that the fact it was so low caused the brakes not to work.. hell the brakes are twenty times better then my dads VT Commodore.. which I laughed.

After telling me to pop the bonnet, just taken the rocker cover off the coils, and a tiny bit of oil in there, fire hazard.. But did me for the oil on the gearbox instead. Walked over to the left hand side, kicked my front bar in the process of power trip and continued to wrestle with my non secure battery which I never got the chance to put the brace on as I lost 2 brackets for it a while back. Didnt apologise, I told him thanks for that. :blush:

Got done for b.o.v as well, had it blocked off...

Spent 15 mins in the car waiting for them to fill out the paperwork, came back to me with a $203 fine for breach ADR suspension rules.. then basically threw me the paper and walked back towards his car while telling me to be on my way.

Yes cops do there job, but I'm a member of the public, I should at least get some sort of respect for some eye contact, really shit me off... :happy:

Lucky enough, I went to Regency a while ago.. cost me 3 grand to get it to pass. After being lied to by the previous owner. -_-

Just dont have the time to do any of it... my parents are getting a house built at the moment too, so I'm obligated to help them out with that too.

Should be a simple sus out, exhaust off excercise.. got some electrical that needs doing (again) useless electricians..

Edited by AdMan
My mate (MYCEF3) and I just got defected on Anzac Hwy. The only thing i got done for is my height but now i gotta take it to regency. If anyone knows where i can get a stock set of R32 springs from it would be greatly appreciated. Also if anyone has a set of stock rims too. :P Regency here we come.

Brad i have front suspension and rims that will pass.

top moount turbo will have to come off with screamer too. Have a manifold at home but no dump pipe and boost controller setup. Give me a yell if you need to borrow anything. Hate seeing my old car off the rd.

does the stock boost solenoid need to be replaced in a r32 with rb25det to pass inspection?

yep. they got me on that last time i went thru. Also the AFM. they are alittle touchy on that. If they arent 100% sure its stock theyll try and send you to nissan,.

I had Z32 and they werent sure

yeh i may just need them from ya mate. I can't see me getting this past regency anytime soon so i may just have to keep it in the shed for a while unless someone wants a defected 32 4 door. lol. I dont have the time or money atm for all this.

I would love it back. But have a house now and 5 cars. Go figure. I had one since i sold that then a case of wtf

yep. they got me on that last time i went thru. Also the AFM. they are alittle touchy on that. If they arent 100% sure its stock theyll try and send you to nissan,.

I had Z32 and they werent sure

My old 32 will pass with that afm. Its the one i had on it to pass regency compliance. Also take the rb25 paperwork in brad

pwned 20 metres from my house.

boost controller, left it in from saturday track day

wheel spacers on front

not worried about getting through regency, pretty sure it will pass anyways, but i just got a manual conversion done and its still registered as auto... what should i do in regards to this or should i just take it through as it is?

At least on a good point, shite loads got done on the ACC (RCK) cruise over the weekend. Just seems that as soon as cops see a Skyline the automatically think defect, going by the guys on here in only the last few days.

At least on a good point, shite loads got done on the ACC (RCK) cruise over the weekend. Just seems that as soon as cops see a Skyline the automatically think defect, going by the guys on here in only the last few days.

yes they set up a station at mawson lakes.

another of my friends got a defect. this one for being to low except its at stock height.

clubby wags kit and 18's i think. no zorst and no other mods. even stock stezza.

f*k they need to do something about teaching cops what cars look like never mind knowing about them.

wankers

Rang up today to book my car into regency and was told that a new place at Lonsdale is opening up to clear defects on Wednesday's and Thursday's so i've got my car booked in for next Wednesday. Hopefully the guys who work there are chill.

Rang up today to book my car into regency and was told that a new place at Lonsdale is opening up to clear defects on Wednesday's and Thursday's so i've got my car booked in for next Wednesday. Hopefully the guys who work there are chill.

let us know how it goes and good luck :)

Edited by SkyHi_33

the powerfc will have to come out as they do check that at regency as well.....REGENCY goes all over your car inside and out and underneath as well.....and trying to hide things wont work as i have before and they just laughed......they see people trying to dodge and hide things everytime mate....

goodluck (think you will need it)......

will a s2 turbo pass through regency or will it need to be the s1 r33 turbo?
dont think there is any visable difference without taking off the dump pipe ?

Mitch is right.....but it should pass regardless as its another OEM product not a aftermarket item....

Okay just recently got my first import less than a month ago and got defected for boost controller, catch can venting and protruding wheels. I've never been through regency so i have no idea what to expect is there anything else i should be taking off my car

hks2530

hybrid fmic

secured pod

3" zorst

apexi FC

dash mounted boost gauge

nismo 555cc

gtr fuel pump

z32afm

boost tee

nardi steering wheel

Cheers, Chris

Edited by cheegar

2530 off, fmic is ok if you haven't cut into the reo bar, or chassis, and it is secure, secured pod is fine as long as it is secured tight, 3'' exhaust will probably have to go as it will be too loud, power fc will have to go, for safety sake the boost guage will have to go, as it is probably in the line of sight, 555's regency may just pick on, fuel pump is ok, afm will need to change as you will be taking out the power fc, boost tee has to go, and nardi steering wheel probably isnt ADR compliant so that has to go.

Good luck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...