Jump to content
SAU Community

Recommended Posts

Hi all,

I have had my car for over a week now and today have noticed, after cleaning the carbon build up from my bumper that there are small pin sized rust spots all over the car, i am pretty sure it is rust as it is the same color as rust, it is not paint. I can get these rust spots out with polish, but it will be a big job, to polish the whole car, I will get it professionally detailed, machine buffed, etc.. to get rid of them, seems the easiest way, has anyone had a similar problem, or know what causes this?

Also, i have a large rust area where the boot lid has been scratched, what is the best way to stop this from rusting further and cleaning it up?

thanks

Kris

Link to comment
https://www.sau.com.au/forums/topic/24785-small-rust-spots-all-over-car/
Share on other sites

are you sure they're rust spots? I mean, to see rust appear, the pin sized scratches would need to have cut through the clear coat, the base coat and the primer. Stone chips at the front of the car will do this, but all over the car? Not likely.

Check the bonnet - if you see any on there, chances are they're not rust as the bonnet is aluminium.

To prevent the rust spreading on the boot lid, you really need to clean the area up, apply an anti-corrosion liquid and have the damage repainted.

thanks, but it honestly has to be rust, i understand what you are saying but after getting second opinoins it appears to be rust spots, i honestly don't know why or how, maybe previous owner was a beach goer and the salt from the beach got to it, not too sure,

i will see if a detailer will get them out for me as for the boot, it is not serious as yet so i will stick to my plan and get my engine mods first

thanks

kris

hi if you live in or near coastal areas. open metal ie chips on your cars body are very sesitive to the salty air from the sea.

jetdat is correct, you have to get it back to bare metal ard prime it immediatly. if a fraction is left over, it will eat away the metal again.

also look for those areas that start to bubling up too.

ron

  • 2 weeks later...

skyliner33wa

i recently got the same shit on my car!

i just got a front pipe fitted and it had all this metal shavings in it, and i asked the guy who fitted it to blow it out with the air compressor before fitting it, but i think he forgot :(

now i have all these little orange specs on the back of my car, even on the rear BUMPER which is plastic. i think the metal particles must have blown out the exhaust and got stuck to my bumper, then rusted when it rained. pretty pissed off, they dont come off very easily.

Chris.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...