Jump to content
SAU Community

Recommended Posts

Hey guys, stock afm's maxed about at 410 rwhp and 16psi, there's a fair bit more in the turbos and am looking for max 400rwk, has anyone done the RB20 swap? As far as i'm aware it's a menu option on the pfc- what's involved in wiring these in? are the plugs simple cut and shut? Other options are Z32- you have to cut and shut the plugs for these to yes? The nismo option seems to be similar in cost and without plug mods so feedback welcome- cheers!

Link to comment
https://www.sau.com.au/forums/topic/248839-r32-gtr-afm-upgrade/
Share on other sites

nismo afms are my pick, but new NISSAN Z32s work well too. I have seen a fair few people having problem with the bosch sourced Z32s though. plenty of people use them without problem, but like I said Ive seen quite a few with problems too. so yeah, for me it's nismo or nissan genuine Z32.

Thanks for the feedback fellas, like the idea of new afm's too- speaking to a wrecker I use a bit he reckons RB25 series 1 and rb20 afm's are the same deal, and 125 ea. as opposed to the minimum grand for the newbies. I could almost justify selling the pfc and getting a map sensor based ecu and with not having to buy new afm's not being too out of pocket at the end of the day also.

Twin rb20 or 25 AFM.s should do the job with only the larger piping causing issues. Should be able to get them on here for around $50 each. IMO twin z32's are overkill, as they will max out at over 500rwkw, and have poorer tuning resolution compared to 20/25 units.

See for yourself the air flow volumes versus the voltage output. By my reading there is sod all between the Nismo & the Z32's. The main difference is the Nismo item can be fitted to a stock airbox.

http://www.nismo.co.jp/en/products/competi...26dett.html#afm

I would be interested in seeing the same curves for the Rb20/Rb25 units as I have heard some widely different stories about their capacities.

DO NOT USE NON GENUINE AFM.

We have had so much proplem's with aftermarket cheap copies that customer's source from who know's where.

Use genuine only.

We have OEM Z32 AFM in stock if that help's.

You will need to re-wire them in to suit but if you need info, more than willing to help.

Genuine Nismo are VERY good but make sure its genuine from nismo, not a cheap ebay copy, buyer beware (Ebay)

Edited by EFI Performance

Just on AFM's

Even though 2nd handies are cheap - they fail too often.

Maybe its my dumb luck, but ive had 2x bung sets of AFM's now in 6 months on my car.

One set failed big time, the other set i have in there now are slowly failing so no doubt will be stuffed in a month or 3...

So long term, the new AFM's might come out cheaper, i just dont have 1k for Nismo's at the moment, and i cant find a decent set of 2nd hand GTR AFM's to get my by lol.

Also too,

Make sure they are mounted correctly. More often than not a failed AFM is the result of broken solder joins in the AFM.

If they are bouncing around the engine bay this is accelrated quite rapidly.

6 months for an AFM, Id be looking at another cause of the problem. An AFM component failure under normal opperating conditions is actually pretty rare.

Yeah RB26 ones - when you think about it... they are 15years old give or take.

So it comes as no surprise to me :)

Dont worry about my mounting or anything, its all firm. I had a set in there that were fine, they were a loan set from a mate and worked flawlessly... but i had to give them back :P

So its not the plugs, i've done the whole trial/error thing so im 100% its the AFM's playing up.

They were both 2nd hand sets (stuffed ones), so im not surprised. New or known low KM ones have always been fine

I mean most Elec based things with Nissan seem to last about that time.

Coil packs, CAS, AFM, Ignitor - all seem to play up much more pronounced after the 10year marker is crossed, and 15years, just go buy a new one if it fails if you can afford.

I just need to find a genuine low KM set that hasnt been bashed around!

Sometimes you get lucky, sometimes you dont!

Just in case anyone wants to know, the RB20 series 2/R33series1 afm's plug straight into the rb26, you can even stretch the inlet pipes over the 80mm rubber inlet snout on the front turbo, you need a pice of 3'' bent pipe to do the rear around the power steering res. Running 20psi reading 4.5 volts. And they're cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...