Jump to content
SAU Community

Recommended Posts

Hey guys, stock afm's maxed about at 410 rwhp and 16psi, there's a fair bit more in the turbos and am looking for max 400rwk, has anyone done the RB20 swap? As far as i'm aware it's a menu option on the pfc- what's involved in wiring these in? are the plugs simple cut and shut? Other options are Z32- you have to cut and shut the plugs for these to yes? The nismo option seems to be similar in cost and without plug mods so feedback welcome- cheers!

Link to comment
https://www.sau.com.au/forums/topic/248839-r32-gtr-afm-upgrade/
Share on other sites

nismo afms are my pick, but new NISSAN Z32s work well too. I have seen a fair few people having problem with the bosch sourced Z32s though. plenty of people use them without problem, but like I said Ive seen quite a few with problems too. so yeah, for me it's nismo or nissan genuine Z32.

Thanks for the feedback fellas, like the idea of new afm's too- speaking to a wrecker I use a bit he reckons RB25 series 1 and rb20 afm's are the same deal, and 125 ea. as opposed to the minimum grand for the newbies. I could almost justify selling the pfc and getting a map sensor based ecu and with not having to buy new afm's not being too out of pocket at the end of the day also.

Twin rb20 or 25 AFM.s should do the job with only the larger piping causing issues. Should be able to get them on here for around $50 each. IMO twin z32's are overkill, as they will max out at over 500rwkw, and have poorer tuning resolution compared to 20/25 units.

See for yourself the air flow volumes versus the voltage output. By my reading there is sod all between the Nismo & the Z32's. The main difference is the Nismo item can be fitted to a stock airbox.

http://www.nismo.co.jp/en/products/competi...26dett.html#afm

I would be interested in seeing the same curves for the Rb20/Rb25 units as I have heard some widely different stories about their capacities.

DO NOT USE NON GENUINE AFM.

We have had so much proplem's with aftermarket cheap copies that customer's source from who know's where.

Use genuine only.

We have OEM Z32 AFM in stock if that help's.

You will need to re-wire them in to suit but if you need info, more than willing to help.

Genuine Nismo are VERY good but make sure its genuine from nismo, not a cheap ebay copy, buyer beware (Ebay)

Edited by EFI Performance

Just on AFM's

Even though 2nd handies are cheap - they fail too often.

Maybe its my dumb luck, but ive had 2x bung sets of AFM's now in 6 months on my car.

One set failed big time, the other set i have in there now are slowly failing so no doubt will be stuffed in a month or 3...

So long term, the new AFM's might come out cheaper, i just dont have 1k for Nismo's at the moment, and i cant find a decent set of 2nd hand GTR AFM's to get my by lol.

Also too,

Make sure they are mounted correctly. More often than not a failed AFM is the result of broken solder joins in the AFM.

If they are bouncing around the engine bay this is accelrated quite rapidly.

6 months for an AFM, Id be looking at another cause of the problem. An AFM component failure under normal opperating conditions is actually pretty rare.

Yeah RB26 ones - when you think about it... they are 15years old give or take.

So it comes as no surprise to me :)

Dont worry about my mounting or anything, its all firm. I had a set in there that were fine, they were a loan set from a mate and worked flawlessly... but i had to give them back :P

So its not the plugs, i've done the whole trial/error thing so im 100% its the AFM's playing up.

They were both 2nd hand sets (stuffed ones), so im not surprised. New or known low KM ones have always been fine

I mean most Elec based things with Nissan seem to last about that time.

Coil packs, CAS, AFM, Ignitor - all seem to play up much more pronounced after the 10year marker is crossed, and 15years, just go buy a new one if it fails if you can afford.

I just need to find a genuine low KM set that hasnt been bashed around!

Sometimes you get lucky, sometimes you dont!

Just in case anyone wants to know, the RB20 series 2/R33series1 afm's plug straight into the rb26, you can even stretch the inlet pipes over the 80mm rubber inlet snout on the front turbo, you need a pice of 3'' bent pipe to do the rear around the power steering res. Running 20psi reading 4.5 volts. And they're cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...