Jump to content
SAU Community

Epa Notice On The Night Of Beach To Burger Cruise


Recommended Posts

They don't need to KNOW that it's over 90db, they need to suspect that it is. Guilty until proven innocent is how it works in Australia with this stuff...

And the cost of proving yourself innocent rests solely on you.

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Same i don't have 1 either ..... If i get 1 im going to skitz i went to so much trouble to get a N1 exhaust so i don't have cop trouble!!!!!!!!!!

Fingers crossed .

I've never had an EPA notice for exhaust noise, but my GT-R is fairly quiet (even with the 3" exhaust).

Can you just pop along to a testing place and get a test done without the EPA, I'd prefer to get it tested and know it's leagal when it suits me, not when I have to prove soemthing to the EPA....

I cant believe it, I have one but not from this cruise.

How did they get all the plate numbers down while everyone was driving past???? did they get a video camera out and pause it everytime a skyline went by.

Why dont cops just go n shoot some 15 year olds and make up some stupid story to justify themselves.

what a load of rubbish... 90% of the bikes that hammer past my place would be WELL over 90db... should be the same set of rules for everyone... I understand it helps them be seen etc but most of them are stupidly loud... I can hardly hear the imports in comparison, even those with fully hektic exhausts :(

adam in the rolla might of got one also

im all sweet atm, but i had twin mufflers on at the time so pretty sure it should be sweet .

so what do they want you do to ? get a DB test ?

lol nice hello kittty

they might of thought i just got stuck in the line up, bloody stupid wagon in the way of that rolla's number plate

Was my car really that bad? :) Only my valve stem seals which are gone anyway, easily fixed.

And I haven't received anything so far.

Edited by adam-__-

my bile has a plate fixed to it's stock exhaust that says it is less than 96db @ 7500 rpm... the redline is 18,500 rpm and i would be guessing it would be well and truly over 100db at that..

nick, bikes have a higher limit - think it's 9Xdb or something.

ah okay fair enough... still, some of them are just ridiculous, even the loudest import doesn't compare... some of the big old school V8's are MUCH louder as well, I don't think turbos are that bad... after all they have a dirty big turbine in the exhaust

ex gates are another story tho :)

Looking at my notice...

Passenger Vehicle (Other than a bus)

Date of manufacture Noise level

Before 1 Nov 1983 96dB(A)

After 1 Nov 1983 90dB(A)

Motorcycle or tricycle

Date of manufacture Noise level

Before 1 March 1985 100dB(A)

After 1 March 1985 94dB(A)

Gday all, your cruise happened to be on the same night as a regular motorbike cruise that occurs in Melbourne every Thursday night . Sort of a fast and furious get together except its for motorcyclists.

Motorbike riders gather at the BP servo in Marine Pde Elwood at 7.30pm, there are up to 100 motorbikes that gather for the weekly ride. Many bikes are heavily modified, especially their pipes, unregistered, unroadworthy and some riders are unlicensed, this ride is monitored by the cops including cops who mingle in the group as normal random riders in plain gear on unmarked bikes. The cops also follow in marked, unmarked cars keeping on eye on the groups behaviour.

The cops would have been there only for the motorcyclists, hence cameras set up etc when you all rolled by. It was just bad luck for you guys, they may not have pinged any motorcyclists but thought we can get these dudes to justify the costs of us being here.

I wprked with a guy in the city Sat Night that gave out 13 EPA notices and I am positive not one would fail the test. He just EPA every car that was louder than stock. What a joke if you ask me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...