Jump to content
SAU Community

Recommended Posts

Hello. This and SDU are the only English-language Skyline sites I can find. I'm not Australian, but maybe you folks can help a Yank in need.

I have an R32 GT-R and I recently got new tires. I drove around for a while and I noticed that when I go over 70km/h, the steering wheel will slightly start moving to the right, but the car will stay straight. As I slow down, the steering wheel will straighten out again. It's kind of scary. This only happens sometimes. Also, when the HICAS light is on, it doesn't happen at all. This didn't happen before I put the new tires on, but I don't see how new tires would be the cause. The tires are the same size as the old ones.

Is the HICAS system doing this? I had a mechanic check the steering rack and he said it was fine. He's the same guy who put the tires on. I trust this guy since he's been my mechanic for a while and I know he won't BS me. I told him about the problem, but when he test drove it....it didn't happen (of course).

He recommended that I remove the HICAS system regardless of what is causing the problem.

I'm completely new to Skylines. I came from years of driving Impreza WRXs, but defected to Nissan.

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/248978-r32-gt-r-hicas-problem-help/
Share on other sites

in thery hicas is meant to disable itself at high speed

so when you go over 70 its disabling but its default position is a bit off

so get a rear-wheel allignment i guess?

last sunday i ripped my hicas rear end out and replaced the whole subframe with a non-hicas one, i win :blush:

Firstly, if the HICAS light is on, that's an error, and HICAS is disabled.

Back to the problem at hand. You had all 4 tyres replaced? Or just front / rear? How are the tyre pressures? Did you get a wheel alignment with the new tyres? Have you checked the power steering fluid level?

As you know when you get new tyres you need to do a wheel alignment front and rear for GTR's as they are 4WD...

Did get one done?

Then check your HICAS Fluid.

HICAS is suppost to help you with your turning / handling.

As you drive over 80km/h and turn the wheel, the rear wheels are suppost to turn 1 degree in the opposite direction to help with the cornering.

mine does this sometimes aswell.

tur on the car...take of and when you hit sixty the steering wheel goes all wobbily. if you try put steering wheel straight it turns left. stop turn the car off and start it again and its fine :)

my mech said easiest fix would be get rid of hicas using a lockbar...so thats what ima do

  • 4 weeks later...

Hi All,

Has anyone found a definative 'fix' or solution to the problem "higeki" raised as I'm now having the same problem as him with the steering wheel turning to the right - it will eventually flick the car momentarially and the steering wheel will re-align itself back to straight and will drive normally?? But it's the scariest feeling when the car flicks like it does...

May need to look into a full wheel alignment asap?

Cheers,

Adrian

mine does the same

i have an aftermarket steering wheel which causes the hicas light to come on during long strait journeys.

my tyre pressures and alignment is fine (just got done)

when its happening i just turn off the car for a second, allowing the turbo timer to keep the car on, this turns off the hicas light and the problem goes away :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...