Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

some good points here guys...thanks

im gona definetly get my bro in-law to drive it while i drive my mums camry, it'l be interestin to hear it from outside and wot other ppl can hear, when both opening it up and just crusing...

if stil not happy out goes the muffler in goes the 3" pipe in its position....

:)

Mine got a lot louder when i got rid of the stock turbo.

Then when i had the HKS cams it got ridicolous, when a cop pulled me up after i got them he said "she's a bit loud aint she?" i was like "yeah she's a bit angry" and he just noded and let me go lol. First good cop ever.

Point of the story, get rid of the stock turbo and get some cams lol.

cams on a 1600 made it go from meh to headache inducing. I think the stag sounds shit in it, but if i rev it standing outside it sounds farken sweet, and neighbours mentioned when they have heard it how good it sounds at WOT

ive got a 3 inch turbo back system from jjr with a metalcat cat converter, Sounds sweet to me, loud but not unbearably so. Sounds menacing at low revs and turns into a really angry bark higher in the revs. Would be the way to go if you have a tight budget in mind.

I had an exhaust place make me a 3" mandrel system with two magnaflow straight thru mufflers. standard cat

then i had it ceramic coated.

really quiet. I flew past a mate on the way home from work the other day. He said all he could hear was turbo whistle...

I have aftermarket manifold standard turbo and aftermarket dump pipe.

I had the mufflers fitted with bolt flanges so i can just pull them out and fit straight pipe easy.

Cams make a HUGE difference to the sound.

Even with stock cams and adjustable cam gears you can get a noticeable change. Pulling 2-3 degrees out of the exhaust cam on my set up would make the difference between pass and fail noise emissions....The bigger your exhaust is, the more cams will change the note...

i think you need to let someone else drive your car so you can hear it from the oustide, because your used to your car you cannot really hear the toughness or notice it.

This happened to me, got a few videos and then realised damn she does sound tough as!

Try it

this is so true.

i used to hear them drive past me n think fk that sounds tough

until my mate drove my car for me and i realised mine sounded even crazier. i'm not sure why its hard to notice the RB growl when your inside the car probably because the exhaust is behind you facing outward.

do what my mate done best sounding car its an s13 with an rb20

hes just got dump to decat pipe to nothing (yep he just took it all off) - little scary following him and seeing massive flames coming from underneath the car just infront of the fuel tank

my mate had a high mount t04e on a stainless mani and and external venting. he also had a cat. 3inch off the turbo with a 5inch tip. That thing sounded sooooo angry even on idle. When the external opened up, it scared every other pedestrian and driver on the road haha. sounded Better then a V8.

When he got rid of the cat, it was even louder. scary. i remember i was sittin in the passengers and he started it up and it kinda felt like my head was vibrating..

Personally, too me a car that is just ridiculously loud pushing 120db doesn't do it for me. (referencing to some people talking about no cats/mufflers/straight pipes etc). I prefer a car that has a nice deep tough note. I've heard plenty of RB's, SR's, V8's etc that sound like a banshee screaming its head off, but sound absolutely horrible. Ever heard a SR with no exhaust........no thanks.

Just my choice though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...