Jump to content
SAU Community

Recommended Posts

Nissan Skyline R33 GTST Type M, 1995 Model. Black in color with all the usual stuff like power windows/mirrors, climate control etc.. Bought the car basically standard 6 years ago, since then have spent over $50k on modifications. The majority of parts have been fitted to the car around 15,000kms ago and were bought new. Car is serviced every 5000kms, always high quality and genuine parts used. The car makes 307rwkw on 17psi on a conservative tune, setup is good for around 400rwkw mark. With the previous setup on this car it ran 12.3 quarter mile times with 260rwkw. Engine has been compression tested and everything is fine. Was tuned by Croydon Racing. The engine bay has had a lot of detail put into it, all that remains is a re-spray to freshen up the car and it will be like new.

Exterior/Suspension

- sprayed and detailed brake calipers (red with white Nissan logo)

- GTR front bar

- Original GTR grill

- R34 GTR rims

- Xenon headlights

- Clear side indicators

- Tein super street damper fully adjustable coilovers

- Whiteline heavy duty sway bars front and back

- Whiteline caster kit/suspension bushes

Interior

- Front strut brace

- Rear GTR strut brace

- Complete R33 GTR interior (seats/door trims)

- Nismo heavy duty clutch pedal bracket

- New battery

- Apexi RSM with stand

- Apexi EL2 boost gauge

- Blitz SBC-iD electronic boost controller

- Nismo white face speedo (320km/h)

- HKS type 1 turbo timer

- Nismo gear knob

- Short shifting kit

- Pioneer mp3 head unit

- Hertz rear speakers

- Pioneer 2 way fronts

- Genuine Nissan mats (full set)

- Chrome door sills

Engine/Performance

- Full engine rebuild at 94,000kms, including full balance and blue printing. Cost me just over $6000.

- Garrett GT3540R turbo with 0.82 rear housing rated at 700hp. Fitted with speedflow braided lines and fittings, turbo cover has been polished

- Tial 38mm wastegate

- Tomei 256’ cams (exhaust and inlet)

- Tomei cam gears

- Custom 6Boost exhaust manifold with temperature coating

- New custom dump pipe and screamer pipe fabricated

- High flow cat

- 6Boost turbo heat shield (polished)

- Micks metal craft aluminium intercooler with custom fabricated piping

- Oil cooler with braided lines and speedflow fittings (mounted behind front bar)

- Turbosmart Blow Off Valve which also sits behind the front bar

- Apexi pod filter

- Radiator air guide

- Nismo 870cc injectors

- Bosch 044 fuel pump (in boot)

- Sard fuel pressure reg

- Custom surge tank receiving fuel from standard pump

- Oil catch can with K&N filter/breather

- (ALL OF THE ABOVE FITTED WITH SPEEDFLOW FITTINGS AND BRAIDED LINES)

- Z32 afm with tomei plug

- Splitfire coil packs

- NGK spark plugs

- Greddy plenum (polished)

- Aluminium radiator

- Nismo radiator cap

- Nismo oil cap

- 3.5 inch exhaust from turbo

- OS Giken twin plate clutch and flywheel kit (OSD2C)

post-749-1229660527_thumb.jpg

post-749-1229660542_thumb.jpg

post-749-1229660570_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/249513-310rwkw-r33-gtst/
Share on other sites

thanks roy, have had the car for quite a while and have though of selling afew times. Just keep pouring so much money into it. all it needs is a respray and the thing will be like new!

Christmas bump!!

Lepperfish

yeah the engine was rebuilt using standard internals. The reason for this is that when i was doing the rebuild parts for the car were not as easily to get as they are now. I was dicked around by wiseco for over 3 months during which the car sat in the garage waiting, so i decided to just got standard items.

Man thats a bargain.. I thought you sold this car already!!

I have personally sat in this car and its deff worth the price for all the mods you get with it!! Wish you the best of luck selling it!!

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...