Jump to content
SAU Community

Recommended Posts

Nissan Skyline R33 GTST Type M, 1995 Model. Black in color with all the usual stuff like power windows/mirrors, climate control etc.. Bought the car basically standard 6 years ago, since then have spent over $50k on modifications. The majority of parts have been fitted to the car around 15,000kms ago and were bought new. Car is serviced every 5000kms, always high quality and genuine parts used. The car makes 307rwkw on 17psi on a conservative tune, setup is good for around 400rwkw mark. With the previous setup on this car it ran 12.3 quarter mile times with 260rwkw. Engine has been compression tested and everything is fine. Was tuned by Croydon Racing. The engine bay has had a lot of detail put into it, all that remains is a re-spray to freshen up the car and it will be like new.

Exterior/Suspension

- sprayed and detailed brake calipers (red with white Nissan logo)

- GTR front bar

- Original GTR grill

- R34 GTR rims

- Xenon headlights

- Clear side indicators

- Tein super street damper fully adjustable coilovers

- Whiteline heavy duty sway bars front and back

- Whiteline caster kit/suspension bushes

Interior

- Front strut brace

- Rear GTR strut brace

- Complete R33 GTR interior (seats/door trims)

- Nismo heavy duty clutch pedal bracket

- New battery

- Apexi RSM with stand

- Apexi EL2 boost gauge

- Blitz SBC-iD electronic boost controller

- Nismo white face speedo (320km/h)

- HKS type 1 turbo timer

- Nismo gear knob

- Short shifting kit

- Pioneer mp3 head unit

- Hertz rear speakers

- Pioneer 2 way fronts

- Genuine Nissan mats (full set)

- Chrome door sills

Engine/Performance

- Full engine rebuild at 94,000kms, including full balance and blue printing. Cost me just over $6000.

- Garrett GT3540R turbo with 0.82 rear housing rated at 700hp. Fitted with speedflow braided lines and fittings, turbo cover has been polished

- Tial 38mm wastegate

- Tomei 256’ cams (exhaust and inlet)

- Tomei cam gears

- Custom 6Boost exhaust manifold with temperature coating

- New custom dump pipe and screamer pipe fabricated

- High flow cat

- 6Boost turbo heat shield (polished)

- Micks metal craft aluminium intercooler with custom fabricated piping

- Oil cooler with braided lines and speedflow fittings (mounted behind front bar)

- Turbosmart Blow Off Valve which also sits behind the front bar

- Apexi pod filter

- Radiator air guide

- Nismo 870cc injectors

- Bosch 044 fuel pump (in boot)

- Sard fuel pressure reg

- Custom surge tank receiving fuel from standard pump

- Oil catch can with K&N filter/breather

- (ALL OF THE ABOVE FITTED WITH SPEEDFLOW FITTINGS AND BRAIDED LINES)

- Z32 afm with tomei plug

- Splitfire coil packs

- NGK spark plugs

- Greddy plenum (polished)

- Aluminium radiator

- Nismo radiator cap

- Nismo oil cap

- 3.5 inch exhaust from turbo

- OS Giken twin plate clutch and flywheel kit (OSD2C)

post-749-1229660527_thumb.jpg

post-749-1229660542_thumb.jpg

post-749-1229660570_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/249513-310rwkw-r33-gtst/
Share on other sites

thanks roy, have had the car for quite a while and have though of selling afew times. Just keep pouring so much money into it. all it needs is a respray and the thing will be like new!

Christmas bump!!

Lepperfish

yeah the engine was rebuilt using standard internals. The reason for this is that when i was doing the rebuild parts for the car were not as easily to get as they are now. I was dicked around by wiseco for over 3 months during which the car sat in the garage waiting, so i decided to just got standard items.

Man thats a bargain.. I thought you sold this car already!!

I have personally sat in this car and its deff worth the price for all the mods you get with it!! Wish you the best of luck selling it!!

Edited by siddr20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...