Jump to content
SAU Community

Recommended Posts

The TS system allows you to use healthy cams particularly if you go bigish on the TS turbine housing .

The point a lot of people miss with a properly functioning TS system is that the turbine housing A/R needs to be big so that you get high flow rates with less pressure driving the gas . To not get a pressure rise/restriction the passages need to be large . This is also the reason why serious TS systems use the larger divided T4 international sized flange on the turbine housing and manifold .

Examples would be the HKS cast manifold for RB26's and the turbine housing footprint on HKSs T04Z turbine housings/manifolds .

Yes I know those HKS Z turbine housings are not twin scroll but they would not have gone part of the way for no reason , cheaper to make a single entry housing than partial twin entry one .

I believe ATP are now offering twin entry T4 flanged TS turbine housings for the GT3582R and maybe GT3076R as well .

http://www.atpturbo.com/mm5/merchant.mvc?S...tegory_Code=GTH

Too late this time but for those interested Geoff probably does T4 flanged manifolds for SR's and has been for RB25/26 for some time . Like all smart people they make the flanges suit both RB25 and RB26 stud patterns .

http://www.full-race.com/catalog/product_i...roducts_id=1640

A .

Edited by discopotato03
  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Geoff definitely makes T4 flanged manifolds for the SR20, as we were discussing that as an option prior to me going the 71R route. The only reason I decided on the T3 was the compatability of other turbo's I'd likely be running as I found the T4 a bit restrictive for me.

It's a shame the .82 housing only just came out, but it will be worth experimenting with down the track with both the 71R and 76R I think. Between Ian and I we should get some good SR data on both turbo's with different housing, and housing modifications.

Well no doubt Geoff would have told you that the 0.78 GT32 housing is workable though no exactly in my mind ideal . It is comvenient in that it is twin scroll and has a "T3" mounting flange on it .

I expect you would have read all the info at Freshalloy.com and it was a while back that Geoff noted that those GT32 housings do create a power ceiling based on their exhaust flow limit , its not what you'd call low but in a perfect world having a bit more flow potential would pay off .

I also hope you noted what the Americans have gotten out of their KA24DE turbocharged engines , killer mid range torque starting 800 revs sooner than the SR20s in a similar state of tune . Arguably a better drift engine , iron block and a real cam lobe on bucket twin cam head as well .

Many won't agree but I reckon a turbo engines turbine/turbine housing/exhaust manifold/exhaust are among its most critical components if you are to make super power reliably .

Cheers A .

I agree wholeheartedly, which is why after building my 'big' engine I decided to go all out on what I felt was the best turbo kit for my application. I was tossing up a lot of options, and was speaking with Geoff and Ian for a few months prior to making my decision, as well as researching all threads on Fresh Alloy, Evo foruyms and anywhere else I could find relevant information.

My existing turbo kit was doing a good job and was quite impressive for it's age in my books, but ultimately I wanted top performance and reliability and feel I'll get that with this setup (hopefully anyway!).

I think the KA24 iron block would have come in handy with my sleeves...

I also hope you noted what the Americans have gotten out of their KA24DE turbocharged engines , killer mid range torque starting 800 revs sooner than the SR20s in a similar state of tune .

Cheers A .

Yeah, a 7.73 at 182mph is not bad from a KA24DE with manual shift.....it even sounds stock at idle Lol.

Although the Mazworx SR22 is still quicker and slightly faster at 7.4 and 183mph

Edited by juggernaut1
tell jash or josh or whoever is working on the car that the customer is always right and install the new turbo :)

Lol.......I always like to get the opinions of others though as they've probably seen more setups than I've had hot dinners....but yeah I will probably try the 3076 52 trim. :)

Edited by juggernaut1

SR OT but the interesting one to research would be the crank from a small KA engine , I believe thaere was a JDM KA20 in something and if it went into a KA24 with longer rods then it maybe possible to shorten the stroke and have a higher rev ceiling .

The 89mm bore gives you more room for increased valve area and the direct bucket actuation is always preferable to rockers IMO . Shoot me I'm biased , had FJ20s in the past .

Something for later , cheers A .

I agree with the rocker opinion....but thats why the VVL heads are becoming popular on the SR's which still use a rocker setup but with a single rod going through each set of rockers to hold them into position.....plus two cam profiles activated by solenoids.

Still its a rocker setup of sorts but Mazworx have proven the reliability of this setup with their engine turning to 11,000 rpm.

Ohh right, I was thinking it was a track dedicated car!

Is this a JDM or ADM S15?

How much of this work have you done yourself?

I f**king love that engine bay, cant wait to see pics of the whole car, hope its a good as that engine looks :blush:

ADM s15

No not a dedicated track car....it looks stock from the outside....to try and keep a low profile on the streets....but so far I'm failing....I've racked up more fines, points loss, suspended licence etc in the last 12 months since the mods were done than my previous 20 odd years of driving. Its just a bad influence on me.....thats no excuse I know....I must get more track time. I will put the new turbo on and head to the track and enjoy it.

I did most of the grunt type work such as fitting cooler, radiator, wire and fit thermo fans, battery relo, spraying engine bay where battery tray was removed, relocate fuse box, ducting, fit autronic, clutch brackets, brake cooling guides, gauges, diff swaps and basically anything that bolted on or needed modifying, or designing, such as my catch cans, washer bottle, aircon brackets, etc. I had the motor built locally and head done by JHH in Qld. My tuner did the rest and I assisted him on occassions when four hands are better than two. I run a business so I don't always have the luxury of time, as I work 6 days a week typically so I did what I could do on weeknights, Sundays and holidays, and farmed out stuff that I couldn't do or would take me too long to do as I wanted to finish the project and at times wondered if it would ever get finished.

The original plan was to fit a GTRS turbo onto my stock motor, add some cams, injectors, give it a tune......12 months off the road and....this is how it turned out.....as tends to happen with most builds.

Edited by juggernaut1

hahah yeah amen to that last bit! never ends up being only what you plan, i.e. "need reconditioned gearbox, hell why not a new clutch while its out?"

Sounds like youve done a fair amount of work there mate, you should be proud!

Was most of the tuning/building done at X-Speed? never had any dealings with them but they seem to have quality work to go with their (large) price tags.

How long till its on the road/at a tuning day do ya rekon?

Lumpy Campbell did the original tune/original work that I didn't do.

C-Red are doing the work on it now. One hold up however, I'm still waiting on an exhaust housing from the US which I have been waiting on for the best part of 3 months. The dude that arranged it to be extrude honed for me in the US sent it to the wrong address.....in America mind you....lol I'm in Australia....obviously he was trippin' on something when he filled out the delivery address :blush::D;):bunny::(:wacko: .

He then had to pay for it to be sent back to him...he'll then hopefully send it onto me in Australia.......and one day I should receive it.....hopefully before fossil fuel runs out!!!! No wonder that country is in a mess :blink: .

Edited by juggernaut1
  • 2 months later...

Well I have received the extrude honed ex housing and just received a pair of the new Tial 44mm MVR watercooled gates and a few other bits and pieces. I needed more room with these shorter gates to fit in the 3.5 inch dump.....and the good thing is that these will fit straight onto the existing flanges/setup. I'll drop the gates off to C-Red tomorrow. Then its in their hands.

Edited by juggernaut1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...