Jump to content
SAU Community

Recommended Posts

can i just bolt on an rb26 head to my rb25 block? it was at 132 mph eh well compared to most rb25's on this forum its pretty well modified atleast brought to the limits of some parts

send him a pm and ask - http://www.skylinesaustralia.com/forums/Di...age-m23582.html

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Im interested in this thread, it obviously points out porting the head improves alot more than most people say.

Oh cams make a massive difference in offboost to boost performance. I found driving that i'd reach 4g before id change (not so great for fuel) just because it was so torquey.. but IMO well worth it.

Edited by DECIM8

porting like everything has it disadvantages as well.

opening ports up, decreases port air speed at low rpm and can effect emissions, low rpm torque and fuel economy/efficiency.

not a problem if power is an ultimate aim at the end of the day, but manufacturers have different requirements when these things are cast.

Hey Regan, I just noticed this thread. A popular combo here on Okinawa is 256 poncam for intake and HKS 264 for exhaust. Lets you keep VCT which really helps with spool IMHO. I think you can squeeze a bit more out of that turbo, but not much. I could see 600rwhp, but that would REALLY be pushing it. Biger cams sound sweet though. I'll have to get a vid with my HKS 264's idling and send them to you. You'd probably need a set of valve springs though--I'm running tomei springs and tickling 8k rpm on a regular basis. Peak torque around 7.2krpm though, so shifting about 7.5 is probably best for speed. I think I need a little bit bigger a/r exhaust housing.

For your purposes, the spray might be better, but I just don't know much about N20 on top of a turbo set up. I've heard forced induction cars really like N20 because it acts like a chemical intercooler, but those cylinder pressures must be intense!

Hey Regan, I just noticed this thread. A popular combo here on Okinawa is 256 poncam for intake and HKS 264 for exhaust. Lets you keep VCT which really helps with spool IMHO. I think you can squeeze a bit more out of that turbo, but not much. I could see 600rwhp, but that would REALLY be pushing it. Biger cams sound sweet though. I'll have to get a vid with my HKS 264's idling and send them to you. You'd probably need a set of valve springs though--I'm running tomei springs and tickling 8k rpm on a regular basis. Peak torque around 7.2krpm though, so shifting about 7.5 is probably best for speed. I think I need a little bit bigger a/r exhaust housing.

For your purposes, the spray might be better, but I just don't know much about N20 on top of a turbo set up. I've heard forced induction cars really like N20 because it acts like a chemical intercooler, but those cylinder pressures must be intense!

lol chris you follow me every where eh? lol yea man i need bang for the buck im goin agianst a zeni tani built r33 vspec with an hks t51 kit at 2.3 bar fully built engine i think you might know about zenitani guy builds fast gtrs then after that i have to run a drag r32 brought from japan 1200 kilo car with 550 awhpwith 2 gt30's, im hoping to get 800+ crank hp out of my car with the gas 2.5 bar and vp c16 i gota loose weight too man im weighing like 360 lbs lol 165 kilos for you aussies i weigh the diference betweena gts and a gtr :banana: to tell you the truth chris ive ran my car with and without vct and i did not notice any diference in spool or power on stock cams next time im on the dyno ill check and see if thiers actualy any diference well with my setup

2 bar at 4200rpm..... hmmmn

as soon as the up the cam spec you will reduce your powerband, increase lag, and loose vacuum. So a daily it won't be. Best bet is to run higher lift and similar duration to stock, step 1.

Thats the opposite to what most people have found. I would upgrqade the cams, as im very surprised you arent getting valve issues at 2 bar. Properly dialled in cams will make the turbo come on earlier, and extend the power band, allowing you to reduce the boost to a more efficient level.

ive got a 409 rwkw rb25det on stock cams with a gt3582 at 2 bar built cp pistons tomei rods greddy intake manifold its also port n polished how much would i gain with some poncams havent found any information on the search engine soo i guess i have to ask heh its either that or n2o i wouldlike the cams but just dont know how much those crapy 256 8.9 lift cams will give me

My old RB25 made 399rwkw @ 17psi with a twin turbo setup running a mix of avgas and pump fuel. It had Tomei cams. 256 inlet and 264 exhaust and Tomei pistons. The rest internally was stock. Just had bolt ons.

I have just built a RB30 bottom end and using my RB25 head with same cams. I want to know what gains I will get my changing the cam timing???

How much do people "advance or retard" the cam gears???

Am i reading that correctly? Did you just say you ran 399rwkw on an internally stock RB25?!?!

It had Tomei pistons, stock crank and rods.

1000cc injectors, greddy plenum, 85mm throttle body, Twin T3/T4 turbos, Haltech E11v2, Tomei cams and had a rev limit of 8200

Edited by WHITER33GTS-T

hmmm full boost of 2 bar at 4200rpm, do you have a dyno sheet? i find it very hard to believe, with cams i would go 264deg with solid lifters, dont want anything to big for street as it would be very lumpy, if you want different degree intake to exhaust then you will need cam gears aswell as it will have to be fine tuned.

It had Tomei pistons, stock crank and rods.

1000cc injectors, greddy plenum, 85mm throttle body, Twin T3/T4 turbos, Haltech E11v2, Tomei cams and had a rev limit of 8200

Ahh woops, i missed that it had Tomei pistons. But still, thats pretty impressive power on the stock rods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...