Jump to content
SAU Community

Recommended Posts

I'll get the ball rolling

1. Work on the handling: new sway bars, new bushes all round, finally fit the coilovers which have been in the garage for 6 months, upgrade as many of the suspension arms etc that I can afford to.

2. Fix all the little dents sh!t drivers have left on my car and get a decent looking bodykit

3. Get the bloody ciggie lighter thing working so I can use my car charger and gps

4. Get that flat boot I've always wanted

5. Work on making the car as legal as possible

6. Get guilt toy to fix my tune ^_^

7. And finally my car will hit the 100,000km this year so get it fully serviced and freshen up a few bits in there i.e. Rebuilt alternator and power steering pump + get the air con condenser fan working + make the engine bay more presentable yet looking more stock (powder coated cooler pipes etc) + fit all the blue vacuum hoses which are living under

my bed

On a side note : quit smoking!

Ok that's mine now tell us all what your beasts getting, go go go!

Edited by DaGr81
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Happy new year man

Get my car serviced and tuned again pushing 400+Hp at rear wheels

Get new Ciggie power outlet yeh for my GPS

Get new Carbon Fibre Bonnet

Get new front bar

thats it so far

well if does not sell ill be geting new front bar+tune and also put my ebc in.

also ever sense the hks hype dampers where put in with the adjustable castor rods the car feels real floaty in the front so sort that out also

haha dave, your car was looking quite dusty when i saw it :P

install new turbo, manifold & wastegate, ecu, fmic, swaybars & adjustible suspension arms, change spring rates on my coilovers, get some side skirts & a front lip & that should be it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...