Jump to content
SAU Community

Recommended Posts

OK, have a Ser 2 Stagea (RB25 NEO) manual, with a hiflow stock turbo. The problem I now have is, large whinning sound coming from the Turbo area (which has now quiet since having to limp the car home 100km's), and the car is making absolutely NO boost. Drove from Hervey Bay to Bundy tonight and back again. Was making boost on the way to Bundy and around there for about half hour, the Trubo seemed to be whining a bit louder then normal and then got to the stage of sounding like there was a Supercharger on there. Not making any boost according to the stock boost gauge.

Could I have just knocked a hose loose/ split a hose when I took the coil pack cover off the other day? Should I just start by taking all the hoses off and seeing if they are split or if any of them are loose? Would a boost leak make the turbo spool louder? And last off, would driving it all the way home with it not making boost, have caused more damage to things? I kept the revs under 3k in all gears and at about 2.5k in fifth gear on the highway.

Any help would be great cause I don't know where to start looking since this is my first Turbo vehicle.

Thanks

Dave

Link to comment
https://www.sau.com.au/forums/topic/250802-boost-leak-or-blown-turbo/
Share on other sites

blown turbo would result in car blowing smoke wouldnt it???

id check the small things first. check all the hoses then if nothing prob start looking into turbo.

but most of the time its always something small so ye check hoses first.

no worries

also another thing ou could look at is see if your exhaust manifold has come lose. sounds silly but my 33 had brokend exhaust manifold stud which on full throttle sounds very bad and i was getting hardly any boost.

thats all i can think off. someone with more knowledge will prob give ya better advice.

how it all works out.

OK, taken of intake and checked front turbine for play/ bits missing. Everything looks normal on front side. Took off cat and there is no bits of anything in there. Will check all hoses again and look for anything split/ not on.

Thanks for the replies and the help.

One other question - when I put the cat back in place, will I need anything to go around the seals?? The gaskets are both in good order but does it need any type of sealant to go on with it?

yeah mate i would put some exhaust sealant in there......when you say its making no boost does it drive the same??? pull the same way it could be that your boost gauge is shagged...but the noise you heard isnt good.....my turbo made a wobbly wistle noise (best i can describe)turned out somwthing had gone through compressor.....got a high flow.....if you floor it and there is noticeable power loss something is a miss....maybe waste gate wont seal or is not closing at all....

Definite power loss. Was making boost earlier in the night, shown by guage, then later you could feel that there was no boost building at all. How do I check the wastegate? If it was the wastegate would it make the turbo sound different?

remove your dump pipe from the turbo and you should be able to feel if not see a little arm with a round cirlce attached to it thats the waste gate it should be hard up against the turbo housing making a seal...look at your turbine wheel it may have seperated from the shaft......if there is no boost it has to bo turbo wheel or waste gate....if the acctuator arm is not attached to the waste gate opener then you waste gate will be open all the time not allowing boost to buil...hope this helps...waste gat should be shut at all times only opens to controll boost level

After having 2 people come and have a look today (both mechanics), both of them think the same thing. Either the bearing or the shaft is gone in the turbo. If it is either of these is it possible just to get those parts replaced? Haven't looked on the exhaust side of things as I ran out of time to rip the dump pipe off. Could I just send it back to GCG and get them to service it and if so any one know a ballpark figure of what it would cost to replace bearing/shaft?

Thanks greatly for all the help.

lol the good ole pialba brake and clutch banana on wheels tehehehe..... that thing wasnt fitted all that long ago... thought she woulda lasted longer then that dave..... how many k's has tha car done since u brought it.... and do u change ur oil very often?

and just a a chance pull tha vaccum line off the actuator see if the wastegate snaps shut. had a case a lil while back of the actuator got stuk open... but turbo wasnt making ne whining noise like u describe... check for shaft play aswell cant hurt....

if ya want me to come have a gander aswell im more then happy to come say hi... its simon here btw maroon 33.... 0432919092 let me know

Edited by skylinekid

Well, we pulled the Turbo off and it is definitelly the turbo that has shit itself. Looks like the bearing has gone in it and let the exhaust wheel rub on the inside of the housing.. Time to look for a new turbo..

Car has only done 7000 k since I have owned it and have allready done an oil change since getting it.

To make things more fun for me, the very last nut that we were taking off to get the turbo removed from the manifold, caught up on the stud and snapped so now that has to come off as well to be repaired. Oh the joy of it all.

Well, off to do some research for the new turbo..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...