Jump to content
SAU Community

Recommended Posts

just some parts that i have left from the wreck

just want to get rid of em

both side mirrors 80

both doors 100

all windows apart from windscreen '

gtr rear spoiler 100

bootlid 60

rear pods 110 not budging on these or else ill keep em

rear bar 60

lhf seat 70

a pillar trims with 3 screw holes for tweeters 50

rhf main power window switch 60

both front clear indicators (clear with abit of orange) 60

lhf headlight with bottom thread stud broken (the one that no ever cbf putting back on) 50

4 kybshocks with king springs front and rear 100

1 rhf type m side skirt 40

front hubs lhf+rhf 150 goood for 5 stud conversion

might have some other stuff which ill put up along the way if i can think of em

cheers

all parts located in melbourne springvale

contact through pm or if u want a quicker reply might as well call or sms 0412-219-552

Link to comment
https://www.sau.com.au/forums/topic/250925-r32-gtst-parts/
Share on other sites

im after the demister airvent, the one on the very top of the dash. Let us know if you have one which isnt warped by the sun.

Cheers

lol

sorry keeping these, cause mine have gone and broken into different pieces

Link to comment
https://www.sau.com.au/forums/topic/250925-r32-gtst-parts/#findComment-4345657
Share on other sites

its me thats picking them up on monday, at least i hope, i msged ya the other night asking if all the clips are intact and you said you would check monday, let me know mate

Edited by HI2U
Link to comment
https://www.sau.com.au/forums/topic/250925-r32-gtst-parts/#findComment-4347317
Share on other sites

possible to get a small cut from the LH rear corner of the boot shut area, not bootlid just the corner, where there is the radius of the boot, rear guard & beaver panel. only need a section about 300mm x 300mm, but you may have to cut the guard or unpick,

is courier pickup an option if i shoot funds over the wire??

let me know cheers nathan

Link to comment
https://www.sau.com.au/forums/topic/250925-r32-gtst-parts/#findComment-4347874
Share on other sites

guys if u are interested.

i wanna get rid of the shell, just the shell only so the rear gaurds roof and that are still good just not the front .

if someone wants 100bucks ono pickup

i just want it out my drivway cause its taking up space.

cheers

Link to comment
https://www.sau.com.au/forums/topic/250925-r32-gtst-parts/#findComment-4348196
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...