Jump to content
SAU Community

Recommended Posts

  • Replies 447
  • Created
  • Last Reply

Top Posters In This Topic

Glad to hear.

Killabeez, check your pm. Yes S13 rear is available.

Musky, the choice for upgrading the rear or not is totally up to you. I had front slotted on my old R33 Gtst and std rear as well. No problems.

Could I please get a quote for Front slotted + Rear slotted rotors and Green EBC pads all round for a R34 GTT? Ship to Adelaide. Thanks.

gday mate

um ive got an r34 gtt

wondering how much all up to get Grooved Dimpled on the front and standard slotted on the back both with pads will be sent to adelaide, 5108

thanks mate

oh thats a decent price um when will the next groupe buy be after that one mate?

um brakes not really in this months budget

no problems

next group buy some time in early July.

if you go to My Controls, upper RH corner, then on the left sidebar go to Board Settings, make sure the "Disable Personal Messenger" section is set to No.

Setting it to Yes will disable your personal messenger.

if still doesn't work, email me: rsoputro at hotmail dot com

(replace the obvious words above with the proper symbols, you know the drill - spam prevention)

i'll send you a quote soon.

Hey bud, after current pricing on front slotted; and for both plain and slotted for rear rotors. To suit R33 GTS-t. Delivery to 4108.

Cheers

Edited by N-DAWG

Hi, is there anyone online who can tell me in the next 5 minutes how the hell to get the rear rotors off an R34GTT? Otherwise I am taking to it with a slegehammer. I assume the handbrake assembly is inside the top hat and I somehow have to undo that? Please help ASAP. I have the car in 1,000,000 pieces right now and want to get it back together.

release handbrake. handbrake drums might be pressing the inner drum of the rotors, making it too tight to remove.

it can get sticky, from all those age old rust and dirt and grime get stuck in between. use rubber mallet. sledgehammer is a bit extreme... :-)

Yeah I released the handbrake. So there are definitely no other nuts/bolts to remove once the brake caliper is off? Just bash the bit of the disk you can see? Trouble is with the shield around it there is not much room to swing or hit.

Damn - might jack it up as high as it will go and get some leverage on the mallet. Thanks! It doesn't seem to have much movement at all - I take it it will gradually loosen up and come off?

Well I have just finished putting it all back together.

In the end I gave up on the getting the rear rotors off - making the necessary noise at 11pm seems like a bad idea in my neighbourhood.

So, today I did:

- Fitted front RDA slotted/passivated rotors

- Fitted front QFM HPX pads

- Fitted front and rear ADR compliant braided brake lines

- Flushed entire brake system with Motul Dot5 and refilled/bled

- Painted all calipers gold

Phew - 9.5 hours all up.

The result is below

post-669-1243527641_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...