Jump to content
SAU Community

Recommended Posts

Hey guys

My first post here.

Sorry if im in the wrong section.

I live in vic and am looking at spending around 8to 10g on a skyline. I know very little about them. Im looking mainly for power here.

I currently drive an 89 honda prelude so have been going without some solid power for a long time.

I would be looking for something that is turbo and that with little but the right mods can produce some reasonable numbers.

For the 8 to 10k budget what specific models would you reccomend??

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/
Share on other sites

r32 gtst or r33 gtst. would be lucky to find a good r33 gtst for around that money but there have been some bargains around that much before.

r32's are getting a little older but i love them more then the 33.

if yo uare looking only for power then go the r33 for sure.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356898
Share on other sites

hey bro

welcome the forums

i picked my r33 gtst up for 8500 and it was a gem, had a couple probs here and there but nothing to major....very decent power too man especially my self coming from a honda just like u theres a big difference...you should find a nice r33 gtst around that budget but get it checked out by someone who knows em pretty well cuz they are a high maintenace car so u wana make sure u get one that has been looked after

im on the contrary to jakez88....i love the 33 over the 32 :) lol

let us know what you get

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356907
Share on other sites

save another 10k and buy an R32 GTR!

but you should be able to get a cheap R33 to suit your budget..

welcome to the forums

and then save ANOTHER 10k when it blows a 26.

32 gtst or perhaps a 33 gtst is your best bet.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4356937
Share on other sites

Id really have to stick to the 10k budget.

Is there any specific year for the r33 gst-t that I should be looking for? And of course it would have to be manual.

if only u were asking this bout 2 weeks ago i was seling my 33 with rwc manual, sunroof fmic, stereo and reg. damn

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357177
Share on other sites

93-95 is what your looking for which is series 1-1.5. but i mean if you can bargain down a series 2 to about that price get one. iremember when i was buying my r32 and i was also interested in getting a r33, a white series 2 with 83,000kms went for $7500. i was spewing as when i called the guy that i would take it he just told me he sold it. some mature guys from bendigo.

keep a look out for the bargains because they tend to happen more now since skylines are getting harder to sell.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357222
Share on other sites

pretty sure 33 series 2 is from 96-98, and prices for lines are getting cheaper by the month so you never know, allthough i would suggest getting a well sorted series 1 or even a 32 over a cheap n nasty 33series2. theres a sticky for the model differences- its worth a look to see what you get for the extra dosh.

drive different models to see how you like them, best of luck let us know how you go :D

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4357378
Share on other sites

Thanks guys

Il keep an eye out for a 96 r33 gst-t series 2.

What are my chances of finding one stock? Or mostly stock with just say an exhaust setup.

I want to plan my own mods properly and that will have my car running hopefully 250 rwkw safely and consistantly.

Im hoping to try and have the car as legal as i can. just to save all the hassles of defects and the rest.

I think coming from the outside into the skyline world most people would say the police are very keen to pull over anyone driving a skyline.

just some thoughts i had.

cheers

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4358522
Share on other sites

Thanks guys

Il keep an eye out for a 96 r33 gst-t series 2.

What are my chances of finding one stock? Or mostly stock with just say an exhaust setup.

I want to plan my own mods properly and that will have my car running hopefully 250 rwkw safely and consistantly.

Im hoping to try and have the car as legal as i can. just to save all the hassles of defects and the rest.

I think coming from the outside into the skyline world most people would say the police are very keen to pull over anyone driving a skyline.

just some thoughts i had.

cheers

Dumbest thing these days to to buy stock as to week later u will want to spent another 5-10k only stuff - 100% guaranteed. So save your self hassle and money and go find one that alreayd has good mods as they wont be selling for much more - then enjoy the line...Just becuase you didnt do the mods doesnt mean they havnt been done properly or its reliable. Check out their workshop for a background.

stock power = the suckness.

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4359214
Share on other sites

Dumbest thing these days to to buy stock as to week later u will want to spent another 5-10k only stuff - 100% guaranteed. So save your self hassle and money and go find one that alreayd has good mods as they wont be selling for much more - then enjoy the line...Just becuase you didnt do the mods doesnt mean they havnt been done properly or its reliable. Check out their workshop for a background.

stock power = the suckness.

agreed.

if you can get a lighlty modded skyline with a RWC you all in the clear.

but again look out for dodgey's. if you know a mech get him to do a once over,

there are little tricks people do to make a fast sale of a dead car that last's for about 2weeks , like some one recently had the joys with a $13k r32 GTR that had the rb26 oil attack 1week later and now dead in a workshop

good luck non the less, plenty of info on the forums here and lots of help and second hands parts also

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4359601
Share on other sites

agreed.

if you can get a lighlty modded skyline with a RWC you all in the clear.

but again look out for dodgey's. if you know a mech get him to do a once over,

there are little tricks people do to make a fast sale of a dead car that last's for about 2weeks , like some one recently had the joys with a $13k r32 GTR that had the rb26 oil attack 1week later and now dead in a workshop

good luck non the less, plenty of info on the forums here and lots of help and second hands parts also

cheers guys. this site has been great.

Say i find something with the stock turbo exhaust system and say boost controller which seems fairly common what kind of work would need to be done to achieve a figure of consistant 250rwkw and with an estimated rough cost to do this

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4369259
Share on other sites

New turbo $1000 - $2000

Bigger exhaust (dump, front, highflow cat, cat back) $500 - $1500

Pod filter or aftermarket air box $50 - $150

Bigger injectors $400 - $800

Z32 AFM $200 - $300

FMIC $300 - $1000

Aftermarket ECU (Power fc, E-manage etc) $300 - $1300

Get it tuned $400 - $800

After all this you would want to upgrade the suspension, wheels/tyres, brakes etc

Link to comment
https://www.sau.com.au/forums/topic/251721-what-to-get/#findComment-4369361
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
×
×
  • Create New...