Jump to content
SAU Community

Recommended Posts

Model: R32 GTS-T

Milage: 122,000k's

Transmission: Manual

Colour: Silver

Location: Gosford NSW

Complied? Yes

RWC supplied? If desired.

Currently registered? Yes July 09

Contact: 0422 306 878

Comments / Modifications:

R33 Turbo with 3" DUMP/3" CAT/3" BACK

Z32 MAF Converted and calibrated.

Large Front Mount Intercooler

Nistune Realtime ECU with Software (Tranferable License with the Car) google nistune for details.

Heavy Duty Clutch and low k's Gearbox from a Manual Conversion (bought a front cut to get the GB/FLY e.t.c)

Walbro Fuel Pump, New Coil (JJR) Packs and BRAND NEW Ignition Lead

Mongoose 3PT Passive Immob + KeylessEntry + Pioneer MP3 HU.

Everything done well and looked after on this car. It drives really well, and with nistune you can setup a low boost daily driver and modify it to suit your needs.

Recently did 197RWKW at Turbo Technics newcastle. Quite easily can do more with another tune.

Looking for around $8000 ono, Will Get some better pictures soon.

Thanks to Anthony (GUILTOY) and Disco Dave for your help with this car! Know you guys will miss it like I will but need a family car soon. :D

post-36720-1231809126_thumb.jpgpost-36720-1231809134_thumb.jpgpost-36720-1231809139_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/252319-r32-gtst/
Share on other sites

post-36720-1231831835_thumb.jpg

post-36720-1231831822_thumb.jpg

post-36720-1231831863_thumb.jpg

post-36720-1231831897_thumb.jpg

Will do another set after a detail. Note some of the reflections in the car look weird, I can send a close up. Thanks for the poeple who commented on the car in pm's!

If by any chance someone has an EL XR6/8 in good condition that would be the only trade I'd consider.

Cheers.

Will

Link to comment
https://www.sau.com.au/forums/topic/252319-r32-gtst/#findComment-4365203
Share on other sites

Owner is a very close friend of mine of many years....

I oversaw 90% of the mods done to this car and I tuned it. It has more power left in it with more boost.

very fast r32 gtst, in very good condition.

Everything that has failed in this car has been replaced with NEW parts only, I have seen william pay 10 x as much for parts for it new then what he could have got second hand.

He seems to like to change the oil every 10 times he drives the car, even though i keep telling him its a waste of money it gets 5 litres of Nulon fully synthetic oil & filter - usually every 500 - 1000k's (he would be lucky to do that k's in a year)

Hope it goes to a good new owner if anyone has any questions about the car they can PM me.

Link to comment
https://www.sau.com.au/forums/topic/252319-r32-gtst/#findComment-4369359
Share on other sites

  • 3 weeks later...
  • 1 month later...

Had some more dyno-tuning time

Set to 178RWKW (real) or 200RWKW on other Dyno's, as I found out recently not all dyno's measure the same!

Running 12.5PSI, AFR's stable and safe. Mid range all sorted and tuned. Very fast acceleration. Happy to send Dyno logs (pm)

Still Mechanically A1. Any inspection or test welcome. No joyrides or time wasters please. Body paint in very good condition.

Revoking previous offer for swap for x6 (got one) but still open for a modified Ford v8 (EL-AUII).

Edited by Someguy
Link to comment
https://www.sau.com.au/forums/topic/252319-r32-gtst/#findComment-4513009
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...