Jump to content
SAU Community

Recommended Posts

Morning All

I would firstly like to draw your attention to the Business Trader Sliding Performance. For the past 3 weeks i have been in discussion with Brent from Sliding Performance about a new clutch and injectors for my car. Last wednesday i deposited 2020 dollars into their account, on friday he told me the money was showing in their account but as though it had not yet cleared. This was a cash deposit so it should clear straight away. Since friday i have sent numerous emails to the website and PM's on SAU to which i have no response. I made it clear that i needed the parts by thursday 15th as my car was booked in for a tune in Adelaide (4 hours from where i live). I have also checked the ABN details for sliding performance and the ABN has been cancelled as of late last year (please see link below). Therefore i am warning all SAU users to not buy from Sliding Performance as this situation seems very suspicious. If anyone has any contact details for Sliding Performance apart from the email i would greatly appreciate them.

http://www.abr.business.gov.au/(xnj4rjvnth...253bstart%253d0

thanks

Jaron

Jaron,

I think you may be over-reacting to the situtation, it hasn't been that long, and PM's and emails aren't the best way to get a quick response. I suggest you try calling them.

They've been trading a long time, and I doubt there is any issue.

Cheers

Paul

mate ur not the only 1 to have had troubles with them.

i ordered a power fc d-jetro through them last year and took 3 months to arrive wen they assured me it would take 21 days. there excuse was they were still waiting on the sensors to come but they had the rest of the computer. i was told it would take another 3 weeks just for them to get the sensors and then send them to me. after some very abussive and threatening language, wot do do u know, i had a pm within 2 hours with my tracking number saying that all parts were on there way.

he mite offer good prices on parts but in my own opinion he has a very bad attitude towards customer service and i now refuse to buy from him, would rather pay a little extra to know that ill get my goods on time

Its Tuesday, and you're questioning something from Friday in terms of response?

Honestly nothing more than a big over reaction.

I can understand you might be a little anxious for your parts, however ordering them less than a week before you need them really isn't the best idea.

No doubt you'll hear from them this week, so please post up once you do, and then i can lock this thread.

They are also a paying Trader of this forum, so its not as if no-one knows who they are, and no-one has dealt with them

yeah thats the thing that has me worried the most, the fact that the ABn has been cancelled and i have not had a response since the money has been deposited. Also very annoyed that i have had to put the tune back when i was promised that the parts would be sent out on Monday as now i dont have them.

Still kind of wierd that they arent a registered business anymore...

They could be registered business now. From that link it was a sole trader/individual ABN that was cancelled. They could now be setup as a company and have a trading name of sliding performance. Being a sole trader can be risky seeing that you have unlimited liability.

As R31 nismoid said, they are a paying registered trader on the forum. I have dealt with them a few times with no problems what so ever.

Hope you get your parts

nothing but awesome dealings with Sliding performance.

last deal was Tomei poncams and had them within 1.5 weeks of ordering, great service IMHO

the turbo I bought 3 yrs ago took a cple months for delivery, but I was ok with that as wasnt in a rush and was kept in touch all along.

dunno about others, always been a pleasure for me to deal with Sliding performance; (edit: also got coilpacks from slide)

.... the turbo had a 1yr warranty & she's still sweet. the cams shoulndt be an issue. the cam spring lifters were from Slide too, just thru an onseller who bought, reconsidered and onsold the order to me.

keep trying to contact them, perhaps via the webpage address they have too?

good luck

They could be registered business now. From that link it was a sole trader/individual ABN that was cancelled. They could now be setup as a company and have a trading name of sliding performance. Being a sole trader can be risky seeing that you have unlimited liability.

Correct - I recently did exactly this, and my old ABN was cancelled and I was assigned a new one.

i have delt with sliding performance a fair bit.

power fc, injectors, afm, turbo coils all from them, it is frustrating when your after an answer and you cant get it right away via PMs and email but i always got my parts in good condition....all round good dealings.....

Nothing but good dealings with Slide from me - most parts ive bought have been in stock and delivered on time, a few have been from Japan, everything has come on time, intact and exactly as requested.

I think the timeframe expected for a response is unrealistic - if I was Slide and saw you'd started this thread for such a small timeframe i'd refund your money and not deal with you again.

Anyway, who orders parts that close to a tune?

Never had a problem with them.

Depending on the type of courier and frieght type used parts will take from QLD to SA 3-7days. If sent on friday if its the arvo then they wont go till monday morning. Unless you paid for overnight express freight it will take some time. I have also had cash deposits take a few days to clear.

I think the timeframe expected for a response is unrealistic - if I was Slide and saw you'd started this thread for such a small timeframe i'd refund your money and not deal with you again.

Anyway, who orders parts that close to a tune?

I thought the same, but after reading it again, I think it's more a misunderstanding over the de-registered ABN. That probably spooked the OP into taking action. Top Chef confirmed that when he registered his company his old ABN was cancelled and a new one issued. Sounds like a reasonable explanation.

+1 though for ordering parts with plenty of time to spare. If parts aren't in stock, things can take 6+ weeks to get here from Japan if on a ship.

For the record, I have had good experiences dealing with Slide.

i think you're all missing the point. he spoke to them, explained he needed the parts by whenever, and was assured that he'd receive them on time. so sliding performance closed the deal on a sale, and then disregards the rest. yes?

Correct - I recently did exactly this, and my old ABN was cancelled and I was assigned a new one.

I had the same thing when going into a partnership.

He may have started out as a sole trader, as he was finding his feet in business, and as he has become larger and had an increase in turnover he has decided to become a company.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...