Jump to content
SAU Community

Recommended Posts

took mine out on sunday, cut my hand on various screws and stuff like 6 times.

In my r32, i unscrewed the fuel line bracket just forward of the filter, then got the filter to an easily accessible place, then pulled like a MF, just came off...

try getting pliers, clench just at the end of the nozzle ( on a soft spot in the line) and lever the pliers against the fuel filter... worth a shot... : )

i just changed my fuel filter on the last service its a bitch...

put hose clamps on either side of it so u don't spray fuel everywhere (also makes the car start much sooner after you have changed the filter) then remove the engine side first (pull damn hard (don't yank it from the engine, hold the hose and the filter and pull them appart) then pull really really hard to get it off from the fuel tank side. thats the hardest....*

My advice is to not do up the hose clamps too tightly when you put the new one in, because I reckon this is what makes the hoses harder to get off next time. Just tight enough to not come loose should be enough.

when i did mine i rememberd getting one end off but the other was tight asss....so i just cut it off...haha. im very paranoid so after i put everything back together i went over the hose again with a wet rag to neutralise any petrol that leaked in case it ate into the hose or caught on fire from the engine heat. as i said im paranoid...lol the car was so responsive after that. any idea on how often the filter should be changed??

Guest RedLineGTR

depends how u run your car also...if u run it to empty then alot of the shit in the tank is more likely to get sucked up...if u leave like 1/4 or abit more in the tank before u fill up, dont chnage it too often...but its a simple thing to do, makes sure your engine gets all the fuel it needs and wants.

Originally posted by RedLineGTR

depends how u run your car also...if u run it to empty then alot of the shit in the tank is more likely to get sucked up...

No one has yet properly explained to me why this is the case. I don't buy into it personally.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...