Jump to content
SAU Community

Recommended Posts

hey guys, how much is it to replace a windscreen roughly (r32)? is it worth buying a used one and getting it swapped?

Couple of neighborhood kids thought it would be a good idea to chuck rocks at my house (got 2 smashed house windows and my windscreen damaged and house mates Lexus has a few dents in it). They threw rocks for around 15 minutes, couldn't really see where they were coming from as it was too dangerous to go outside. Cops showed up after 20 minutes but i guess they ran off after that. Has to be one of the houses behind our street .. cant wait to figure out who it was :angry:

Oh and also, if someone has a house for rent in south east anywhere ... ill take it. I've had enough of this northern suburb BS.

Link to comment
https://www.sau.com.au/forums/topic/253074-r32-windscreen-cost/
Share on other sites

thats where you go to your gun shed, pull out the bean bag shot gun and start shooting back!

bloody little kids, if you have a younger person you know who goes to the local school , better set him up with some cash to fish them out.

hey guys, how much is it to replace a windscreen roughly (r32)? is it worth buying a used one and getting it swapped?

Give National Windscreens a call. It was 3 years ago, but a brand new one was $180 fitted on site for my GTR. I wouldn't bother with a second hand one, personally.

As to the radio not working, R32's (well, GTR's at least) use a 'diversity' system which uses an antenna built into the front windscreen AND the rear windscreen de-mister grid as an antenna (there's a module in the LHR quarter behind the boot trim that has antenna and grid power connections, it acts as some sort of filter system to eliminate radio interference). Of course this assumes your still using the stock radio (unlikely.....). I disonnected the rear grid antenna connection and added one of those aftermarket Aerpro hidden antenna's. Works fine.

Give National Windscreens a call. It was 3 years ago, but a brand new one was $180 fitted on site for my GTR. I wouldn't bother with a second hand one, personally.

As to the radio not working, R32's (well, GTR's at least) use a 'diversity' system which uses an antenna built into the front windscreen AND the rear windscreen de-mister grid as an antenna (there's a module in the LHR quarter behind the boot trim that has antenna and grid power connections, it acts as some sort of filter system to eliminate radio interference). Of course this assumes your still using the stock radio (unlikely.....). I disonnected the rear grid antenna connection and added one of those aftermarket Aerpro hidden antenna's. Works fine.

how s the reception?

damn man. i hate little kids...

kids started throwing plums at my house at night. but.. we hid and we lay in wait. for which we pelted their homo asses with water balloons and hosed the little mofos down till they started crying.

ambushing.... its teh shizzz

they did a farking shit job of it but meh what can you do

The important thing when having a windscreen replaced - and it doesn't matter who does it - is to make sure any damage to the paint under the old sealer is repaired BEFORE putting the new windscreen in. When they remove the old sealer they always scrape the old sealer off and can damage the paint, which could expose the underlying metal resulting in corrosion down the track (the new sealant only delays the inevitable). I've seen this on many cars and had to do the repairs, which in extreme cases involves lots of welding.

I usually use a high zinc primer or something like Kill Rust, but I also ask the installer to come back in a few days after he's removed the windscreen. That give me time to restore the paint, they usually don't mind, but I realise that might be difficult if you need the car back on the road quickly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...