Jump to content
SAU Community

Recommended Posts

Nice car Noddy,

I would really like to keep the GTST but i am a bit hesitant to strip out the interior and fit a cage etc. Once i have done this i will not be able to get it re regoed and there is no other class for it to race in other than sprints if i ever want to go further due to engine mods.

What to do?

Sounds like you have made ya mind up Ryan!

You really want to get into more racing, so unfort mate, looks like the 33 would have to go....depends though, hows your salary? :P have both? skyline and race car? :D

thats the single mans dream who still lives at home. lol. Married men arent allowed to have two cars weevil, you know that silly.

Sounds like you have made ya mind up Ryan!

You really want to get into more racing, so unfort mate, looks like the 33 would have to go....depends though, hows your salary? :yes: have both? skyline and race car? :)

thats the single mans dream who still lives at home. lol. Married men arent allowed to have two cars weevil, you know that silly.

Sucks to be you, married and tied down to only 1 fun car. The minister for war and finance in our house drifts and is comming sprinting this year as well. At last count there were 15.5 cars in the yard(big yard). 3 fords, 6.5 nissans, 4 toyota's, 1 holden enhanced by nissan and 1 Chev.

Sounds like you have made ya mind up Ryan!

You really want to get into more racing, so unfort mate, looks like the 33 would have to go....depends though, hows your salary? :P have both? skyline and race car? :)

Yer i really just want more track time and the skyline will cost a fair bit more to get it tracking often, and i don't want to destroy a nice street car.

I still only want to do sprints etc for the next while but it would be good to have a go a door to door racing one day when i am a bit more experienced and skill full.

I will really miss the big girl we have been together for about 5 years now.

The misses is trying to talk me into keeping it and still getting another but 4 cars and a trailer is a bit much for me, But the insurance company would love it ay.

Feel free to PM me your thoughts if you think i am being a goose.

LOL @ Stuart!

Yeah Im in the same boat as Ryan (haha no pun intended!) and most people here, Im getting married next year, about to buy a house...The skyline is going to stay for a while for me!

Noddy - Lucky for some! :P NSW is the most expensive state, it sucks, I wanna move to a cheaper state so I can have more toys, more space and fun haha

whoops I am a late arrival.

FIrst thing is be ready to make a decision that your road car is not a track car. I took almost 3 years to make that decision with my r33 gtst with track days pretty much every month. I was pretty dumb.

These cars are getting really cheap. Buy a track only car and you will save a heap because you don't need to compromise. eg. I used to do pads every 5 days and rotors skimmed every 3 days. over time this really added up but it seemed cheap at the time because I paid the bill in bits.

For under 5k you can buy any rolling shell - silvia/gtst/gtr. personally i think 32 gtst is the best choice due to wieght/suspension design/price of bits, but up to you. you can put anything up to 3l/26head in it so you can have any power level you can afford. And its legal for ipra.

I went 32 gtr for 2 reason - I wanted to do targa tas and I wanted to door to door race (production cars). It is able to be competitive in both even 20 years later. But you need to understand its not a cheap option, my gtr has cost about 50k over 5 years for only 1 targa and about 10 race rounds. Better to stick with something like a 32 gtst for about $2k + say 10k work to get a good track car. Then run it in the MSA series Brad mentioned + supersprints + hillcimbs. You can be competive outright and still have low budget.

whoops I am a late arrival.

FIrst thing is be ready to make a decision that your road car is not a track car. I took almost 3 years to make that decision with my r33 gtst with track days pretty much every month. I was pretty dumb.

These cars are getting really cheap. Buy a track only car and you will save a heap because you don't need to compromise. eg. I used to do pads every 5 days and rotors skimmed every 3 days. over time this really added up but it seemed cheap at the time because I paid the bill in bits.

For under 5k you can buy any rolling shell - silvia/gtst/gtr. personally i think 32 gtst is the best choice due to wieght/suspension design/price of bits, but up to you. you can put anything up to 3l/26head in it so you can have any power level you can afford. And its legal for ipra.

I went 32 gtr for 2 reason - I wanted to do targa tas and I wanted to door to door race (production cars). It is able to be competitive in both even 20 years later. But you need to understand its not a cheap option, my gtr has cost about 50k over 5 years for only 1 targa and about 10 race rounds. Better to stick with something like a 32 gtst for about $2k + say 10k work to get a good track car. Then run it in the MSA series Brad mentioned + supersprints + hillcimbs. You can be competive outright and still have low budget.

Great Advise.

Remember in IPRA if you change the block and or head from the original motor you have to race at a minimum weight. So a R32 GTS-T had a RB20, if you fit a RB25, RB26 or RB30 you will have to weigh 1400kgs!

Ash

Ryan, that evo would be the pick of those four!

Duncan, great advice mate! Is that 50k over 4 years include purchase of Gtr? Did you build it up or buy already done?

I know what you mean about your old 33 gtst, sounds like Ryan and myself now!! Ha ha

Duncan, great advice mate! Is that 50k over 4 years include purchase of Gtr? Did you build it up or buy already done?

I know what you mean about your old 33 gtst, sounds like Ryan and myself now!! Ha ha

yeah well the problem is the 33 gtst is such a damn good car. It puts up with light track work over and over without breaking anything expensive so you just keep using it. There was a while I was doing a track day every month for about 2 years with only brakes and fuel to replace. In the end when I sold the motor was gone and it needed right rear wheel bearing (too much eastern creek i guess) but that was all.

anyway....try not to get sucked in like I did, it is more expensive than it looks and you have to compromise on all bits when its a road and track car. Go track only car with rally rego and you don't need to compromise, it is all track....

re $50k over 5 years... yes that includes buying the car, it was $9k. You have to remember road/rally imports are dirt cheap because there is no compliance cost and you dont have to start with a clean/straight car, in fact it is better not to because you are just going to smash it some day some how. Also I have spent about 20k on engine rebuilds in that time, some very cheap and some very expensive....not sure if that should be a guide or not. We have done the bulk of the work in the driveway but do get maybe 20% of things done by various workshops (either when I'm in a rush, or its a nasty job)

Cheers Duncan, you certainly have got me intersted in this now!!

But with the race/rally rego, would you be able to get that for, say I had a race only silvia, if I got it logged booked like yours, but only raced in supersprints, not targa or production like what you do, would that still be elgable for that rego? Or already buy a logged car, then apply for that rego? And it can be used for any club event as long as there is a permit? (like our Xmas cruise?)

Sorry to hijack thread Ryan!!!

you have to have it log booked with cams and from memory (duncan will correct me if im wrong) need to have a cams NC licence to hold race/rally rego in NSW.

Providing there is a CAMS permit for the event and the car is road worthy then you can use the vehicle.

Ryan I think you would have a lot of fun at our local Hillclimb... you can always stay with us. First event is next Sunday and only need your L2S. Much the same setup as the speed weekend only more spectator friendly i.e. start and finish in the pits (full loop).

Check it out on http://www.sdmahillclimb.com/ entries close on Thursday 5th Feb.

YOU TOO CHUBBS!!! you said you would this year :P

whoops I am a late arrival.

FIrst thing is be ready to make a decision that your road car is not a track car. I took almost 3 years to make that decision with my r33 gtst with track days pretty much every month. I was pretty dumb.

These cars are getting really cheap. Buy a track only car and you will save a heap because you don't need to compromise. eg. I used to do pads every 5 days and rotors skimmed every 3 days. over time this really added up but it seemed cheap at the time because I paid the bill in bits.

For under 5k you can buy any rolling shell - silvia/gtst/gtr. personally i think 32 gtst is the best choice due to wieght/suspension design/price of bits, but up to you. you can put anything up to 3l/26head in it so you can have any power level you can afford. And its legal for ipra.

I went 32 gtr for 2 reason - I wanted to do targa tas and I wanted to door to door race (production cars). It is able to be competitive in both even 20 years later. But you need to understand its not a cheap option, my gtr has cost about 50k over 5 years for only 1 targa and about 10 race rounds. Better to stick with something like a 32 gtst for about $2k + say 10k work to get a good track car. Then run it in the MSA series Brad mentioned + supersprints + hillcimbs. You can be competive outright and still have low budget.

I don't really want to get another car that I have to do bucket loads of engine mods to make it competitive or I will end up with another car that is not eligible for any class.

I have been thinking of maybe an evo 6 maybe with a std evo 9 turbo and std boost etc you can get decent power at the wheels and a good chassis and not bad weight, I will just have to look into diffs etc?

I can not find any info on this MSA series, can anyone help out?

Sorry to hijack thread Ryan!!!

No worries bud, It is all good info.

  • 2 weeks later...

This has got me really interested too!

My baby has sat unregistered in some position around the yard for almost a year and a half now. I really miss driving it. :D

I've heard the best way for low budget weekend warriors is to go into a vehicle with a mate and share the costs. Any of you guys who do this regularly now been in that situation? Does it work out well?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...