Jump to content
SAU Community

Painful Static Electricity Shock

rs73

By rs73,
in General Automotive Discussion

 Share

Recommended Posts

rs73 Grand Master

rs73

Posted
Posted

Has anyone else experiencing static electricity shock when getting off their car?

I get it almost always especially after driving to work in the morning. even when touching the glass (instead of door metal) when getting off the car...

What's the best way to reduce/eliminate this?

Link to comment
https://www.sau.com.au/forums/topic/254082-painful-static-electricity-shock/
Share on other sites
rs73 Grand Master

rs73

Posted
  • Author
Posted

a search on eBay found a few antistatic strip that is fitted on the bumper and hanging down to touch the ground.

Looks kinda silly.

also found a few antistatic shark fin antenna or short type aerial that can be mounted on the roof or at the gap of the boot lid.

anyone tried any of those devices? do they help or just a gimmick?

The hanging antistatic strip touching the grounds sound logical but I can't see how antistatic antenna can work? discharging the static onto thin air? I thought static needs to be 'grounded'

some_cs_student Veteran

some_cs_student

Posted
Posted
1. Touch and hold any metal part on body/door of car.

Use (1) and take it like a man! lol

How bad is it? My car did it for 3-4months and stopped again, not sure why / how, the best way I found was the touch the inside of the glass or inside of the car, it was *less* of a shock then touching it on the outside.

I've seen anti-static straps but they look ridiculous.

VB- Veteran

VB-

Posted
Posted

its because your not touching anything when you get out of the car. you must be letting go of everything and just spinning sideways on ur arse, then putting your foot on the ground and lifting/stepping up. when u move across your seat like that it builds up alot of static electricity (obviously). rest your hand on a metal part of the car before u lift ur ass out of the seat, and leave it resting on the car till ur out. it will 'earth out' all that static, so to speak

rs73 Grand Master

rs73

Posted
  • Author
Posted

tried that, but sometimes when you just forget of that routine then the zap gets bad.

and pretty much anything else, coming out of elevator and touching office's door, looks like an idiot every time hesitating for a second or two after swiping my card, staring at the metal door handle, and then use the back of my hand to test-feel the door handle if there's a zap or not before opening the door.

getting into elevator and leaning on the handrail (metal)

I'm electrified...

Ultimategtr Proficient

Ultimategtr

Posted
Posted

I get them bad. So bad that sometimes it makes me jump a step back.

Its amusing for my wife and the on lookers but dam annoying for me.

Will try the grounding thing, i just never bothered to look it up haha. I just saw the thread so ill give it a go. Cheers

rs73 Grand Master

rs73

Posted
  • Author
Posted

I always wear cotton most of the time. business shirts.

and leather shoes.

and still get zap

my wife's colleague has a habit of walking around in the office dragging his feet, then walk up behind one of them and held out his finger close to the ear and zap!

rs73 Grand Master

rs73

Posted
  • Author
Posted

that's what I thought but the instruction said need to be mounted as far back as possible, that's why people put them somewhere on a metal mount in the rear bumper.

the antistatic antenna also recommended to be at the top of rear windscreen or on the boot lid.

I have yet to find a scientific reason why it needs to be mounted towards the back of the car not middle...

gotRICE? Veteran

gotRICE?

Posted
Posted
1. Touch and hold any metal part on body/door of car.

2. Put your foot on the ground.

3. ???

4. Profit.

We are the UnderGnomes? ;)

Just mount it anywhere. IT will do the same job mounted up the front or middle as it would in the rear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...