Jump to content
SAU Community

Recommended Posts

I run -7's with a shitty exhaust and stock afm's. With id1000's and a walbro 400 fuel pump I make 325kw on 20psi with E85. If I fix my exhaust and chuck some bigger afm's on I'd probably crack 350kw.

It'd be much easier to do it with -9's and I don't think there would be much more lag involved.

What exhaust you going for?

Ok, had a play.

Your car is obviously tuned in 3rd gear going by the speeds. It's a bit rough but you get the idea.

3950: N= 176 P= 215

4400: N= 252 P = 300

4800: N= 306 P = 375

5244: N = 326 P = 415

5644: N = 344 P = 445

6100: N= 350 P= 460

6500: N = 342 P = 472

Take into consideration how they were loaded up for the runs and whatnot.

Just out of curiosity...

I have a set of -5s on my std RB26DETT and i'm only making 300kw on 22psi...

The things I noticed are my actuators are set at 8psi and I have 600cc injectors coupled with a Walbro 255 pump.

Are these going to be an issue or is it a tuning issue?

EDIT- Using 5speed from RB25 and 4.08 S14 Diff in an S15

Edited by TheGeniusMoose

Thats what im trying to figure out! My injectors hit 100% duty cycle on full boost thats why I thought my pump or injectors were maxing out but doesnt make sence I should be making 300kw on less than 20psi id have thought...

Previously I had valve float but that has been rectified.

Edited by TheGeniusMoose

What exhaust you going for?

Nothing at the moment as I'm content with the power. I think I'll get more gains if I upgrade my actuators 1st and see how I go.

Eventually I'll rip the cat out and the 3" exhaust and replace it all with 3.5".

Ok, had a play.

Your car is obviously tuned in 3rd gear going by the speeds. It's a bit rough but you get the idea.

3950: N= 176 P= 215

4400: N= 252 P = 300

4800: N= 306 P = 375

5244: N = 326 P = 415

5644: N = 344 P = 445

6100: N= 350 P= 460

6500: N = 342 P = 472

Take into consideration how they were loaded up for the runs and whatnot.

Was 4th gear he doesn't tune in 3rd

Well the 255L was an upgrade on the SR lol. What should I be aiming for when I buy a new one?

The pump provided its getting the right voltage should have an issue with that power. I think it's time to put your inspector gadget hat on and start investigating.

I'd say, once again, attention to detail on the setup is where the better results are. Big, size matched exhausts blah blah.

Got a sheet Nick?

Exactly.

I had 340rwkw with -9s on 98, but it wasn't a stock engine - and that is where the extra bits/gains come from

Nothing at the moment as I'm content with the power. I think I'll get more gains if I upgrade my actuators 1st and see how I go.

Eventually I'll rip the cat out and the 3" exhaust and replace it all with 3.5".

I see!

An actuator upgrade will do it good.

Yeah, if you want to get over the 350 rwkW mark, go 3.5".

Exactly.

I had 340rwkw with -9s on 98, but it wasn't a stock engine - and that is where the extra bits/gains come from

+1

Other thing is the turbos are REALLY laggy.

I get 18psi by 6000rpm and power drops off completely at 22psi at 7500rpm so theres no point revving past there...

The pump provided its getting the right voltage should have an issue with that power. I think it's time to put your inspector gadget hat on and start investigating.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...