Jump to content
SAU Community

Recommended Posts

Ive been getting some gearbox noise for some time now, just lately it is getting worse. Apparently this is relatively common in rb20's, has anyone heard/experienced similar?

Regardless, something has to be done, either pull it apart and diagnose - which involves possibly sending it away for a bit, or spending $800+ on fixing, or sourcing an r33 box as a replacement.

Has anyone had this problem and attended to it? Or know a place in perth to find an r33 box?

cheers

av

Link to comment
https://www.sau.com.au/forums/topic/25489-noisy-rb20-gearbox/
Share on other sites

thx.

Yep Dsturbd, clutch in, no noise...clutch out and its grinding. 1st and 2nd gear are pretty noisy in drive too. My mate said the same thing about the bearing.

Im tossing up whether to spend time pulling the gearbox apart and getting replacements or get an r33 gearbox, i would hate for the rb20 to do it again. (not sure how common it is with rb20s)

Hopefully some have had similar experiences and can suggest one way or the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...