Jump to content
SAU Community

Recommended Posts

For those of you who like looking at the bigger picture, it's worth looking at where we fit in the global scheme of things as far as exports out of Japan. Some fascinating figures there, but I'll let you draw your own conclusions :D

CUSTOMS_DATA_2002_2008_.pdf

Link to comment
https://www.sau.com.au/forums/topic/254922-some-amazing-stats/
Share on other sites

For those of you who like looking at the bigger picture, it's worth looking at where we fit in the global scheme of things as far as exports out of Japan. Some fascinating figures there, but I'll let you draw your own conclusions :D

At a wild guess, 2009 numbers are going to half 2008 and russia will have fallen more than most on a percentage basis.

A few additional notes:

- those figures don't include container shipped vehicles, which for some countries makes up a large proprtion of their imported vehicles

- those figures don't include cars that cost under 200,000 yen FOB, so for some countries which bring in very cheap cars the numbers are actually higher

Therefore in fact Australia is even slightly lower on that list since container shipping to Aus is unusual, and the vast majority of cars into Aus are over 200k FOB.

If you think some of those countries are doing amazing numbers, keep in mind that per capita Australia is still relatively high, especially given how restctive our import laws are. Also for some other countries it's a whole different ball game... for some coutnries for example the average profit (in Japan) on say a $5,000 car might be only $100 so they are hugely volume driven and don't bother wasting their time with finding out about the condition of the car... they just play the numbers. I sometimes speak to people who buy cars for the South American markets at auction here in Tokyo and a typical order for them from a customer will be "I need 5 Toyota Echoes, 3 white, 1 red, 1 black, all manual, all under 80,000km. Here's xxx yen, whatever's left over is yours". That's it! They then go and plug away on however many cars they need to until they get lucky and fill their order. The cars can be beat up, in poor condition, whatever, that's the amount of care given considering the profits involved, they rarely actually go and look at the cars and to get extra photos of a vehicle for a customer after purchase would be considered way too much effort. A very different market indeed. And don't even get me started on some of the garbage the Russians buy.....

Would nice to have one or two customers like that hey Ben!

The other issue is dodgy buyers at the other end - one of my agents does a few cars into Africa, and he was saying that for every 100 emails he sends out, he'd get 20 saying they're interested in buying from him, so to weed them out, he would send them a dummy invoice saying they'd bought the car at auction.

Why? Of the 20 that received a dummy invoice for a car they'd requested that my agent bid on for them, 15 would never contact him again, 4 would say they'd run out of money or apologise and say they couldn't buy the car for a variety of reasons, and 1 out of the original 100 would actually TT the money on the invoice. At that point obviously the agent would go and buy the car, and continue dealing with them, but hell, it's a lot of work.

What about the dodgy Pakis and Indians...funny they and the Ruskies all seem to work together..Bucketloads of em up my way but good for cricket games in summer and the ruskies love to booze on!

Your right about quality. I have a Nepali mate mate that scouts cars for them gets finders fee and as long as it falls into certain price bracket orders are buy it and dont worry too much about the condition. Some of the cars are high km's and on last legs and get sent to Russia and money has already been handed over. No-ones gunna ague at the other end as most are being pre-sold by russian mafia.

lol, it's not hard to see when the 15yo rule hit 1989 and 1990.... thanks very much all the guys who brought in all those lovely rusty, accident damaged and just plain rubbish cars (not just sklines either, heaps of rubbish landcrrushers, and beemers, merc etc) in that period. on the plus side once they binned CPA and 15yo it means the average standard of cars imported these days is much higher. not all 89/90 cars were shit, in fact there were (are) heaps of beautiful ones that came in but they were about 1 in 10 at the time I reckon. importers ruined it for themselves and just went nuts. :)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is <2k rpm, going to WOT sees the MAP go +ve even before it crosses 2k and it has >5 psi by the time it hits 90 km/h. That's still <<2.5k rpm, so I think it's actually doing really well. Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
    • Oh, it's been done. You just run a wire out there and back. But they have been known to do coolant temp sensors, MAP sensors, etc. They're not silly (at Regency Park) and know what's what with all the different cars.
    • Please ignore I found the right way of installing it thanks
    • There are advantages, and disadvantages to remapping the factory.   The factory runs billions of different maps, to account for sooooo many variables, especially when you bring in things like constantly variable cams etc. By remapping all those maps appropriately, you can get the car to drive so damn nicely, and very much so like it does from the factory. This means it can utilise a LOT of weird things in the maps, to alter how it drives in situations like cruise on a freeway, and how that will get your fuel economy right down.   I haven't seen an aftermarket ECU that truly has THAT MANY adjustable parameters. EG, the VAG ECUs are somewhere around 2,000 different tables for it to work out what to do at any one point in time. So for a vehicle being daily driven etc, I see this as a great advantage, but it does mean spending a bit more time, and with a tuner who really knows that ECU.   On the flip side, an aftermarket ECU, in something like a weekender, or a proper race car, torque based tuning IMO doesn't make that much sense. In those scenarios you're not out there hunting down stuff like "the best way to minimise fuel usage at minor power so that we can go from 8L/100km to 7.3L/100km. You're more worried about it being ready to make as much freaking power as possible when you step back on the loud pedal as you come out of turn 2, not waiting the extra 100ms for all the cams to adjust etc. So in this scenario, realistically you tune the motor to make power, based on the load. People will then play with things like throttle response, and drive by wire mapping to get it more "driveable".   Funnily enough, I was watching something Finnegans Garage, and he has a huge blown Hemi in a 9 second 1955 Chev that is road registered. To make it more driveable on the road recently, they started testing blocking up the intake with kids footballs, to effectively reduce air flow when they're on the road, and make the throttle less touchy and more driveable. Plus some other weird shit the yankee aftermarket ECUs do. Made me think of Kinks R34...
×
×
  • Create New...