Jump to content
SAU Community

Recommended Posts

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

Link to comment
https://www.sau.com.au/forums/topic/255972-devostating-dyno-results-for-r34/
Share on other sites

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right, anyway i was devo when i saw the results so i booked it in to get a after market ecu and an electronic boost controller (getting done on 17th). i was wondering what the next upgrade would be best to make more power out of my car.

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

stock r34 gtt (neo) is 145kw at the wheels, which is 194bhp so your result is right on the money.

See: http://nissanskyline.6te.net/GTT_spec.htm

I wouldn't trust that site if my life depended on it.

1. The information was all ripped from these forums about 4 years ago.

2. Its out of date, never updated

The best info is always found by searching these forums, rather than some muppet who claimed limited info from these forums as his own.

IMO that site should be shut down as there is so much wrong with it that it gives me a headache to read

ANYWAY - 206kw = 280hp

184bhp is about 134rwkw... so that sounds exactly right give or take a 10kw difference for dyno's etc

So realistically there is nothing devastating about it at all, its a factory car making pretty much exactly the factory HP/KW.

To be honest you need a full exhaust etc before a ECU/Tune... You wont get anywhere near the gains with JUST a ECU/Tune as you would if you put a decent flowing exhaust on there

don't be upset dude, as others have said. if the car is stock (completely) then thats RIGHT on the money on what your car should be making. Look at getting an exhaust and an EBC running around 10psi and you'll be making about 160rwkw maybe less depending on the dyno.

hey i recently brought a skyline r34 gtt everything is stock, so i decided to put it on the dyno to see what is puts out in only managed to do 184bhp (i think that it feels faster than that), i was told that they came stock with 280hp is that right

<cut>

i was wondering what the next upgrade would be best to make more power out of my car.

First question, no, that's wrong.

Second question, there are threads on this, what exhaust system are your running? And are you running a decent cat converter?

Yes, people often go the ECU + more boost + exhaust system and either a pod filter or airbox panel filter upgrade + good tune and get a nice gain :D

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

Hey, maybe im a bit confused, i thougth that the GT-T's came out with 206kw(flywheel) as well as the GTR? Ok maybe not 206 but it should still have considerably more then the R33 (187).

So on paper given a high 20% D/T loss, a healthy GTT should see around 160-170rwkw stock form am I not correct in thinking that? 184hp is a mere 137rwkw.

When was it serviced last?

Could you post up your dyno sheet by any chance?

yeah i thought it would put out more than what it did, last service was about a month ago

yeah here is dyno sheet

post-57941-1234052813_thumb.jpg

If a mechanic advised you to spend money on an ecu and boost controller, before exhaust and even a better quality air filter (in the airbox), you should go else where; It seems he is just interested in making the most money from you and doesn't care about your interests.

Fair enough he may have gotten confused about the power figures etc, but any good mechanic would recommend upgrading the factory exhaust system first.

guys, seriously now, a "non-happy dyno" on a stock car will go anywhere from 120-140rwkw depending on the health of the car and other factors. as al said too, you're mechanic is probably saying that to you to squeeze $$ out of you. oh dude your car is really low on power you need this this and this now to make it go hard.

first things first. get an exhaust, a cai, and maybe a hi-flow cat. you will notice a very nice gain alone just with those mods.

if your going to be boosting it id be putting a larger intercooler at the same time.....

also the r34 gtt is alittle heavier than the r33 gtst so the extra engine power is almost cancled out so not much differnece in actual real life power between stock r33 and stock r34...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...