Jump to content
SAU Community

Recommended Posts

hey all..

after much reading etc. on here and other articles.. i had almost decided it was worth it to flare my guards to accept a proper width tyre for my new rims.. rather than stretching skinnier tyres on there.. i have read alot of good comments about response and stiffness.. and alot of negative about excess weight of the wider wheel, incorrect fitment, etc, and so on and so forth.. .. so a i pose a quick question to the haters and negative nancys about stretching...

if its not good.... why do the multi million dollar wrc teams do it for tarmac?? they are the elite of road handling cars... driving on regular road surfaces that you and i can drive on... and using a P-Zero semi slick tyre... which are road legal and obtainable to the normal joe blow with wads of cash.

for a track car that has a properly prepared track surface free from road irregularites it might be a different story... but if the wrc cars do it... obviously they have a good reason and are advantageous over running full size tyres for tarmac rallies..

so what are some thoughts on the stretching?? any articles to or for it?? and whats an acceptable stretch??

cheers

Linton

hey all..

after much reading etc. on here and other articles.. i had almost decided it was worth it to flare my guards to accept a proper width tyre for my new rims.. rather than stretching skinnier tyres on there.. i have read alot of good comments about response and stiffness.. and alot of negative about excess weight of the wider wheel, incorrect fitment, etc, and so on and so forth.. .. so a i pose a quick question to the haters and negative nancys about stretching...

if its not good.... why do the multi million dollar wrc teams do it for tarmac?? they are the elite of road handling cars... driving on regular road surfaces that you and i can drive on... and using a P-Zero semi slick tyre... which are road legal and obtainable to the normal joe blow with wads of cash.

for a track car that has a properly prepared track surface free from road irregularites it might be a different story... but if the wrc cars do it... obviously they have a good reason and are advantageous over running full size tyres for tarmac rallies..

so what are some thoughts on the stretching?? any articles to or for it?? and whats an acceptable stretch??

cheers

Linton

Um how did you arive at the conclusion the WRC teams do it? In rally Ireland (the last round) they used wets mostly & then the thinner softer (basically snow tyres) because it was so bitterly cold & wet. As far as I can remember only Henning Solberg used slicks (or cut slicks) on the final day. You can be assured the rim width is matched to the tyre width rather than stretched to try & take compliance out of the side wall.

Basically people only used stretched tyres because they are either too cheap to pay money for proper tyres or they have been hoodwinked by all the drift hype.

it was obvious on the tv footage on sunday, of the ireland rally, that sebastian loeb's tyres were stretched.. and yes some were using wet weather tyres with deeper grooves, others were using a dry tyre.. which the pit guy said was a p-zero, and the tread looked very streetish... not a cut slick. id try and find photos, but my work has blocks on that sort of stuff.

it was obvious on the tv footage on sunday, of the ireland rally, that sebastian loeb's tyres were stretched.. and yes some were using wet weather tyres with deeper grooves, others were using a dry tyre.. which the pit guy said was a p-zero, and the tread looked very streetish... not a cut slick. id try and find photos, but my work has blocks on that sort of stuff.

What you are looking at are wet/snow tyres designed to increase the tyres bearing pressure & hence avoid aqua planing. Not that it helped Atkinson. Then again he should consider not driving like a Muppet. Just an idea. :P

Well i had 235's stretched over my 10's and while it allowed me to fit these under the guards i wouldn't do it again, if your doing street driving then keep your sidewall there as it also aids in protecting the rim a little incase you come to close to the gutter, if your tracking it then get some decent semi's and keep the sidewall on them aswell as they are beefed up to handle all the extra cornering loads exerted during high speed cornering

or you could be CAREFUL around gutters :P

i run 235's / 245's on 18 x 9.5 and have NO probs with it as a daily...

prolly wouldn't run it on 10's or more tho

have run 20 x 8.5 with 225/30s for years, only thing you have to watch is tyre pressures as you can pop it off the beed pretty easily i hear, but it makes sense to have a bit of a sidewall if your loading the thing up around quick corners..

Can be cool or necessary depending on what you are doing it for. Drift, Track or just to tuck them in ever so slightly is OK in my opinion.

It can also look pretty ghey.....

Stretch the Canvas!

FAIL

DSC_0051-1.jpg

2vwiolj.jpg

EPIC FAIL

tuckinlikewhoa.jpg

5zojarl.jpg

Nice

CL911-1.jpg

Picture_067.jpg

Vids:

Strech a space saver on a rim using flames

im a big fan of stretch, and have done it before, and loved the results.. that was with bridgestone potenza s03's.. i have just noticed alot of people telling others its not good.. so was wondering exactly why it isnt good..

some of those pics are nuts..

cheers

Linton

if its not good.... why do the multi million dollar wrc teams do it for tarmac?? they are the elite of road handling cars...

if the wrc cars do it... obviously they have a good reason and are advantageous

Don't WRC cars also run anti-lag?

If they can do it, what possible long-term harm could come of it for people who don't have multi-million dollar budgets?

Its indicative of so many of the flatcappers in imports. Cant afford the right size tyre for the rim so just cheap arse it with something they found in the bin at kmart tyre centre that doesnt fit and looks like a punk with too much butt crack showing.

Then try and convince the rest of the world how "foolly sik" it looks.

Don't WRC cars also run anti-lag?

If they can do it, what possible long-term harm could come of it for people who don't have multi-million dollar budgets?

thats completly irrelevant.

Its indicative of so many of the flatcappers in imports. Cant afford the right size tyre for the rim so just cheap arse it with something they found in the bin at kmart tyre centre that doesnt fit and looks like a punk with too much butt crack showing.

Then try and convince the rest of the world how "foolly sik" it looks.

is that why the top secret s15 in d1 runs stretched tyres... and ken maeda, and hibino tetsuya in the hachis.. and the apex rx7, and kazamas s15, and tanaguchis altezza.. definatly cheap arse kmart tyres thrown on there.

thats completly irrelevant.

is that why the top secret s15 in d1 runs stretched tyres... and ken maeda, and hibino tetsuya in the hachis.. and the apex rx7, and kazamas s15, and tanaguchis altezza.. definatly cheap arse kmart tyres thrown on there.

Yes, That is excactly why. They ae all mudcrabs. One day they will evolve and go straight in lieu of sideways.

You buy wider rims for more traction... now what is the point of putting little tyres on it then, defeats the purpose...

Awww i got 10 inch wide rims but only 8 inches of the tyre is actually touching the road... how mad.

ppl do it more so for the looks.

and yes they are fully sick but also there is a limit of strecthness. some f the pics posted are just crazy stupid stretch. but say 265 on a 10" rims looks nice and not overly strecthed.

Yes, That is excactly why. They ae all mudcrabs. One day they will evolve and go straight in lieu of sideways.

haha... mudcrabs... i like it.. "back in 10... gone mudcrabbing.".... "no officer, i wasnt drifting, i was imititating a mud crab"

the point there, is they are all using a street tyre... not a full race slick.. so why do drifters require no sidewall flex? to keep it tight and responsive and feel what the car is doing... not rolling around on tyres... i guess it comes back to grip vs handling and the two being completly different areas.

traction is only one part of bigger wheels.. bigger wider wheels make for lower profile tyres and more and a wider wheel track, effectivly changing the roll centre. i had 215s on a 14x5.5" rims once.. traction was great... handling... pfft forget it.

i may only have 8" of tyre on a 9.5" rim... but the profile is lower/tighter, stiffening the sidewalls reducing sloppiness, so the body on its $4000 stiff as coilovers and alignment arms is not losing it all through a sloppy tyre... that may well grip.. but can give an uncertain feeling as it rolls around.

Or, you can set your suspension up correctly and use the correct width tyre for the rim and still have a good stiff sidewall simply because there are lots of tyre makers these days who build both street and track tyres to those specs.

There are some who may find it neccessary to stretch but in the main its just a cheap way of putting rubber on a fat rim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...