Jump to content
SAU Community

Recommended Posts

Hi

I am looking for some gauges, not sure what to get or where to get them. I am after an oil temperature & oil pressure gauge, would prefer it come with all fittings, sensors, mountings etc required for installation

Not sure what brand to get, I want something that will do what it’s designed to do & accurately, something easy to install that won’t break after 2 months

Can anyone recommend some gauges & where to get them?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/
Share on other sites

Electrical for anything to do with oil.

Defi are probably better quality but dearer. Both however will do the job fine and are about the same to install.

Or you could find some nice Jap gauges (Blitz, Greddy, HKS etc), but with the dollar the way it is they are dear as hell. Having said that, i have the Blitz white faced gauges in mine and love them to death, however they don't make them anymore :wave:

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432296
Share on other sites

Electrical for anything to do with oil.

Defi are probably better quality but dearer. Both however will do the job fine and are about the same to install.

Or you could find some nice Jap gauges (Blitz, Greddy, HKS etc), but with the dollar the way it is they are dear as hell. Having said that, i have the Blitz white faced gauges in mine and love them to death, however they don't make them anymore :wave:

Thanks for that

Getting a price for DEFI now, will probably go with the DEFI's. Does anyone know a trader that does DEFI at a reallly good price?

If the DEFI guages work out too expensive I may just go with Autometer provided there considerably cheaper

my next guage purchase.... gonna get rid of my triple din cluster for this...

Always loved the DEFI din setup, should have got one when the $$ was better. It was so much cheaper back then

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432320
Share on other sites

April, driving me fkn insane

$900 for DEFI control unit and the two gauges, OIL TEMP & OIL PRESSURE

april... not long matey! wanna come for a cruise when you get it back?

$900 is a lot for 2 guages.... you have a free din slot?

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432445
Share on other sites

Autometer in mine (including mechanical oil pressure), no problems whatsoever, plus they look pro.

Thanks for that, will be looking into Autometer tonight

april... not long matey! wanna come for a cruise when you get it back?

$900 is a lot for 2 guages.... you have a free din slot?

Not too long now, will be the longest 6 months ever

Yeah would love to, will let you know once I'm back on the road

It's more than I want so spend that's for sure, yep, have a spare din spot

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432476
Share on other sites

Nothing wrong with Autometre. Just make sure you get the sportscomp line or better as they are more accurate.

Do not get mechanical oil pressure gauge as that is illegal and can be dangerous running oil pipe into the cabin

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432482
Share on other sites

Autometer in mine (including mechanical oil pressure), no problems whatsoever, plus they look pro.

Ok this I dont understand and shits me to tears when customers argue with me saying "she'll be right". Why do people people like you not realise how dangerous it is! There is a reason it is illegal. (unless it is on your bonnet, in that case sorry bout this).

You do realise you have high pressure oil running inside your cabin, right next to your face at around 50-100psi. Meaning if you get into a slight accident, enough to cause that line to break off, you will have oil at 50-100psi hitting you....

Guess who won't be looking "pro" then...

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432679
Share on other sites

man i got 4 defi guages and a defi control box, it cost me $1200 brand new all up,

should be about 250-300 a gauge and then 150 for control unit,, (bf series) the defi's are spot on, read up about them and theres actually a fair bit u can do with them, also they look sick

o also, try perfectrun.com.au, they have good prices and takes about 3 days from japan to get to u,

Edited by sly32
Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432876
Share on other sites

Nothing wrong with Autometre. Just make sure you get the sportscomp line or better as they are more accurate.

Do not get mechanical oil pressure gauge as that is illegal and can be dangerous running oil pipe into the cabin

No worries mate, thanks

hypergear have some cheap digi electric guages, also have oil cooler adapter for sensors cant remember if they sell the sensors tho.

How good are they, I don't want some cheap nasty Chinese shit

try psiparts.com mate

Will check it out thanks

Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4432879
Share on other sites

Guess who won't be looking "pro" then...

the bottom of my headunit?

relax buddy, they are illegal in australia, but they are not illegal in sweden, where the laws are way more stringent and geared towards safety, i couldn't even have a custom made exhaust manifold for my old volvo 240 because there were worried that without it being properly made it could be a safety risk...

then again, over there in the middle of winter, hot oil going everywhere doesn't sound like such a bad thing.

regardless, it's my car.

Edited by Paris Hilton
Link to comment
https://www.sau.com.au/forums/topic/257575-what-gauges/#findComment-4434767
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...