Jump to content
SAU Community

Recommended Posts

Ghostrider, that bar you posted is the same as my car has I think

Same as this one? http://r30map.zive.net/~userjun/r30meeting...003/image76.jpg

This car is quite similar to what mine was like when it was imported... mine also had the HUGE wing, but no cage, and its white

I used to like the Ironmask front, but I think it looks silly from any angle except about 45 degrees. The MR30 style front can look tougher I think, but only if it's done right

Gonna go check if my bar is the same now

************

Yep, thats my bar. One piece glass.

Wouldnt mind seeing a pic of that bar with a standard front

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Ghostrider, that bar you posted is the same as my car has I think

Same as this one? http://r30map.zive.net/~userjun/r30meeting...003/image76.jpg

This car is quite similar to what mine was like when it was imported... mine also had the HUGE wing, but no cage, and its white

I used to like the Ironmask front, but I think it looks silly from any angle except about 45 degrees.  The MR30 style front can look tougher I think, but only if it's done right

Gonna go check if my bar is the same now

************

Yep, thats my bar.  One piece glass.

Wouldnt mind seeing a pic of that bar with a standard front

Adam,

What I'm playing with is:

1. stock lights with iron mask bonnet & cut down stock HR grille, fill in bottom space.

2. stock lights with cut down iron mask grille

3. same as above with either standard DR front spoiler/air dam

4. same as above with my front bar/air dam.

Will post the hashed results when completed. Thought I might sell my MR30 Hatch with iron mask lights, grille & standard bonnet, same as the jap guy. Would be diferent look for here.

Sorry guys,my bad.I was meaning that it had a 31 Blinker custom fitted to it,I know the 31's are in a different location stock. :D Of course it's not anyway,I forgot the later 30's had that style blinker. :slap: I was still thinking of the old "square" type.

HR31 flares are avaiable from R31 House,and there's spose to be some guys from "R31 Skyline club" getting copies made up here.

1984 Paul Newman HR30 4 SALE!

L20ET motor re-comditoned approx. 7000km ago

Triple hybrid turbo

Mild cam grind

3 inch exhaust and dump pipe

2litre Toyota supra intercooler, harness, boost controller and koni special front shockers. (Not Installed)

Very rare! Only 3 registered in Aus!

$5500 not neg.

1984 Paul Newman HR30 4 SALE!

L20ET motor re-comditoned approx. 7000km ago

Triple hybrid turbo

Mild cam grind

3 inch exhaust and dump pipe

2litre Toyota supra intercooler, harness, boost controller and koni special front shockers. (Not Installed)

Very rare! Only 3 registered in Aus!

$5500 not neg.

i gather this is your car and that amount is what your looking for!!or is this the add for that one for sale ages ago cause there are more than three people here with paul newman versions 2door anyway??

just got some updated pics.....i do have some engine ones but there too big so i'll have to get them smaller!! those rims will be resprayed black later as they look more gold than black at the moment!!

just looking through that website again and found this one, this is what i want mine to look like when she's finished, one day!! that is the kind of rear wing i want and a nice new front bar, something like the one ghostrider posted up resprayed would be great. looks like i'm a long way off!!

Hey guys I havint been on this forum for about 4 or 5 months and seem to have missed a bit. Far out this one big thread allright 850++ post and 30 pages wow. Anyway ive got a 1984 HR30 Skyline 4 door sedan which is now in the prosess of having a Mazda 13B Rotary engine :D (yes I know a very odd swap but very original) so far its had motor fitted to make the engine and gearbox X-members, its been paneled and repainted in a nice bright red with a silver pearl and plenty of sparkle, and the interior has been redone with a momo 320mm, new carpet, 2 black racetech bucket seats, black rear seats out of a f15a mitsi diamante, Autometer 5" Tacho/Oil pres/Water temp and fuel pres gauges the wheels are 17x8 ROH ZS's, just sent the motor away to get rebuilt and ported, rear disc end out of turbo model been fitted, now have to decide what im going to do with the suspension/breaks, (probably go with s13 fronts, with r32 gts-t 4 pot's and dont know with the rear yet) Just as long as it is fully sacked out hard!! and im waiting for my r200 lsd to be rebuilt so I can chuck it in, waiting on my turbo cosmo 5speed to arrive from japland also and my custom made 4 core alloy radiator and no dout I will find a few other bits and peices to do or rebuild as I go or get more cash. I will have the car on the road by september 25 (a while away but im in no hurry because thats when I get my licence back if I get it going any earlyer I will end up driving it and geting in trouble). Please dont be to harsh on me for my choice of powerplant for it :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...