Jump to content
SAU Community

Recommended Posts

']got some pics of my car today all shiny and clean haha and 1 with the new 17s on the back (just for a photo tho not leaving 17s on the back and 15s on the front! haha)

i reckon some AVS Model 6 rims, or Enkie 5 spokes would look sweet on the front in 17", with the Rays on the back. what you guys reckon?

Are the new rears the "rays" you're talking about? Personally,I think they're a bit skinny! I like the Wantanabe's better,maybe just with a fatter rear,but that's just me! :D Very nice looking DR by the way Ant! Very clean.That does look like an HR31 front lip,doesn't it......

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

0HR30T - yeh the rears are the Rays rims i got. they are a bit skinny i guess, 17x7s they are. the Watanabes are 15x6s. couldnt put my finger on quite what didnt look 'right' about the Rays but must be the width. im gonna hang onto the Watanabes too though, so i can pick and choose i guess. i think ill stick to Watanabes if ever get into club event/track type stuff so i dont mess up the 17s and to save on tyres haha but then it probably wont grip/handle aswell with the smaller wheels *shrug* :)

Yas - haha yeah man my exhaust is ****en huge. everyone always says that. it came on the car that muffler, its massive muffler and then 5.25" tip! u can easily fit ur closed fist into it with room to spare. probably a bit big but im not gona take it off haha you probably get a muffler with a 3 - 4" tip. probably be pretty hard to get one as big as mine anyway!! haha

good to see some life in these post again!!! asked prank to move the thread to a more fitting area... anymore power into a rb20 than 200rwkw and its time for new injectors and fuel pump..then its upwards and onwards to the 300rwkw mark, at or around that point it'll be time for a new bottom end or replace the bits left!! i'll be looking (over the next 12 months) to get to the 250rwkw mark that'll keep me happy.....HOPE WE LIKE OUR NEW HOME!!!

with rims: the R33 N/A skyline has the 4 stud pattern but does anyone know if the if offset is about the same? i've got my hands on a set of volk 16" rims from a r33 at next to nothing $$ wise..

dude id say that the offset is about the same, im only surmising however i know people that put NA R33 rims onto their s13s without troubles, and s13 rims generally fit 30's okay i think. so id say you'd be right with 16s from a 33!

0HR30T - can u even fit 9's on the back without coilovers n stuff? haha ill have to get some better rear-on angled sortof pics eventualy of the rims .. i only had 1 photo left on the digicam card so i just took 1 pic from a good general angle !

ah in classic skylines now i see , i stil used the link from general chat haha

9's would go under the stock rear end,but they'd have to be spot on the right offset I think.

This thread is now located in Classic Skyline's.Not in General Discussion....It's a new section a bit futher down the page....

and I notice no ones flamed me about my RB20 comments.... where's Ghostrider? :rofl:

Edit: ok,so I was too late :(

Hey all,

Just joined, I've got an '82 DR30, fj20t (of course) needs looots of tender loving care, just blew the box a couple of weeks ago, its got a box out of a 720 ute in it now :-) I had one lying around...just to add my 2 cents worth to the speed in second gear thing...I got 130kph at about 8000rpm :-) and it didn't seem to have any intention of slowing down.

Can't do it now though, only got about 0-90 now..gets there really fast though!!

Catch you all around.

hmm dunno why it says i have none either ... i wasnt too sure how to use the gallery thing took me a while to suss it out so maybe i didnt check a box somewhere along the line or something :) but they're in there haha

lol yeah man ****en love the shine! i used the red coloured Turtle Wax on the body, and then this bumper black stuff which is kinda like black shoe polish on the bumpers & side plastics to make sure they're black as the rest of the car. I love the side on pic where you see all reflections along the side :D

hmm now you guys make me want fatter rims haha ah well i just impulse bought those 17's i wasnt really intending on upgrading, just ive always liked the look of them and thought they'd match the car coz they look pretty old school (tho theyre made 1992 by the sticker on the inside, so theyre nearly 10 yrs younger than the car!). they have a +36 offset. not too sure how much room they have to the strut, probably couldve gone 0.5-1" wider. but like i say, i just bought them on a whim for 200$ the pair!

i was thinkin of getin some 16x7 enkies for the front rather than waiting for 17s .. but then 17s will look better =]

hey [ant] is it really worth all that shine cos winter means a lotta shitty weather hey... ^^ my car needs a bit of a polish but i cbb (cant be bothered) cos its just gonna rain on it again =P

i uploaded photos too and it still doesnt have that photos = 0 with a link on my name...

yeah the shine will go ... but my car has a bit of scratch on the passenger door under the doorhandle, and a scrape along the wheel arch/side on passenger side also .. i polished it day after i bought it (new years eve last year haha) and it covered those up .. then i noticed them again after i washed it, so i just polished those areas, & they ended up looking way shinier than the rest so i had to do the whole car!!

cant hurt anyway, puts a coating of polish on it again. ill wait till the scratches show up again which'll probly be around october or so and ill polish it up again ready for summer time cruising! haha

got a question for all you dr30 guru's...the brake pads, are they the same as another model or something 'cause I'm having hells own job finding out anything about them. Someone said they thought (the fronts I'm assuming) are the same as the ones from a model of 720, anybody know any more than this?

thanks.

got a question for all you dr30 guru's...the brake pads, are they the same as another model or something 'cause I'm having hells own job finding out anything about them. Someone said they thought (the fronts I'm assuming) are the same as the ones from a model of 720, anybody know any more than this?  

thanks.

they are different to the other models, have you read the post from the start as theres heaps of info on brakes back there some where, i might go to my first post and put some kind of page index for the different things we've talked about!

i have to say go the endless greenstuff for the front and black stuff for the rear and you wont look back...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...