Jump to content
SAU Community

Recommended Posts

boost is not related to stock coils keeping up or not

they simply die of old age

so you can run 27psi if you like

one day they will die and misfire regardless of engine boost

once the engine is on load, it will misfire

so run whatever you like

1.3kgcm2 if you want

the turbo is a high flow, the ecu is std but has a haltch intercepter connected which has been tuned, The engine has forged pistons. Im guessing the coils are as old as the car. Someone told me it could be the higher boost is blowing out the spark?

breaking down spark is different to coils dying

coils die due to age, when they die, like i said, they misfire as soon as the engine is on load

ie one day its fine, next misfire city, so its all of a sudden.

spark breaking down is usually too much boost or wrong gap or intake temp too high

or combination of all three usually. if running less boost cures the misfire its probably spark breaking down

my coils lasted 160,000 then gave up

coils die due to age, when they die, like i said, they misfire as soon as the engine is on load

ie one day its fine, next misfire city, so its all of a sudden.

In my experience the typical coil misfire is the insulation giving out, everyone I know who has put work into decently re-insulating them have fixed it fine. I run up to 18psi on my original S2 R33 coils with extra insulation on them is going fine :(

Yea it happened really bad one night when the air was still pretty hot. I found a few FAQ's on how to insulate the coils, So i might give that a go and replace the spark plugs. What better out of BCPR6E or BCPR7E? Or do people recommend any other ones?

who can repair coils?

I have splitfires in mine atm, sometimes when I leave car to warm up in morning, it will run on 5 cylinders, ill go out, disconnect connection to coil #3, plug it back in and away it goes back on 6 cylinders.

But when I drive and give it a little stick, it starts miss-firing so i assume its that faulty coil?

who can repair coils?

I have splitfires in mine atm, sometimes when I leave car to warm up in morning, it will run on 5 cylinders, ill go out, disconnect connection to coil #3, plug it back in and away it goes back on 6 cylinders.

But when I drive and give it a little stick, it starts miss-firing so i assume its that faulty coil?

the 10+ year old plug or wiring is likely at fault vs a new ~ish splitfire coilpack set

You can also get the coil pack loom from Nissan for around $140AUD from memory... its pretty cheap if the plugs are a bit stuffed.

I purchased new for mine with the splitfires, good insurance.

And for the record i made 370rwkw on stock RB25 coils, they were in very good condition :D

You can also get the coil pack loom from Nissan for around $140AUD from memory... its pretty cheap if the plugs are a bit stuffed.

I purchased new for mine with the splitfires, good insurance.

And for the record i made 370rwkw on stock RB25 coils, they were in very good condition :D

yeah...quite a high price..it might be better to find a private seller they might charge 30 bucks or lower.

A private seller for a coil harness?

I paid $120 for mine from RHDJapan, with shipping it worked out to the same as getting it from Nissan but got it in one week instead of three. I looked up the harness on RHDJapan recently and they're up around AU$270 delivered now :)

I was troubleshooting a misfire when hot issue for AGES, turned out it was the insides of the coil harness plugs falling apart.

yeah...quite a high price..it might be better to find a private seller they might charge 30 bucks or lower.

I meant quite low price considering…

Why get one 2nd hand for $30 only to have the same damn problem 6 months later?

Makes zero logical sense. You cant get them much cheaper as bubba has pointed out :)

Pay the Nissan price, its actually reasonable in price for something OEM and after 10-15 years does need replacing

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...