Jump to content
SAU Community

Recommended Posts

Ok so thought i would put an open invite out to my SAU friends to come help me celebrate my 27th birthday. I sms'd a few of you, but dont have everyones numbers.

Saturday 28th at Chalkers Pool Hall at Glenelg. Anytime from 9. Will try get a few tables together at the back of the hall.

Hope to see a few of you there! Come help me celebrate getting old :P

Flick

Link to comment
https://www.sau.com.au/forums/topic/257902-come-help-me-celebrate-my-bday/
Share on other sites

holly shit flick your turning 27.....

i thought you were way younger then that...ahh well

i will be out then

should be good to see some regular SAU faces

also would be nice to see who is good at the 8 ball game lol :blink:

Edited by Krishy
holly shit flick your turning 27.....

i thought you were way younger then that...ahh well

i will be out then

should be good to see some regular SAU faces

also would be nice to see who is good at the 8 ball game lol :blink:

Oh yeah man, 27 is old az brew, after 27 you start farting dust...

Lets get krishy drunk and make him run around the pool table without his trousers. Fun for the whole family!

-D

Oh yeah man, 27 is old az brew, after 27 you start farting dust...

Lets get krishy drunk and make him run around the pool table without his trousers. Fun for the whole family!

-D

Very funny D

But first you have to get me drunk....then secondly you have to beat me at pool

i somehow like my chances on both :blink:

Very funny D

But first you have to get me drunk....then secondly you have to beat me at pool

i somehow like my chances on both :blink:

I'll spike your milkshakes with polish vodka. and i'll make someone else beat you cause im shit at pool

-D

I'll spike your milkshakes with polish vodka. and i'll make someone else beat you cause im shit at pool

-D

you can spike my milkshakes all you want lol

hang on a sec....thats what i do to get pissed at work :blink:

i still take my chances against most players...

we should do a SAU pool comp or something.....knock out best of 3 or 5????

you can spike my milkshakes all you want lol

hang on a sec....thats what i do to get pissed at work :blink:

i still take my chances against most players...

we should do a SAU pool comp or something.....knock out best of 3 or 5????

Hah I'll pass, but i'll put a tenner on PK

-D

holly shit flick your turning 27.....

i thought you were way younger then that...ahh well

i will be out then

should be good to see some regular SAU faces

also would be nice to see who is good at the 8 ball game lol :(

lol yeh, 27.. pretty old :D

well i got 2 tables booked up the back corner of the hall, so plenty of room. I suck at pool, but the cocktails at that place rock!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...