Jump to content
SAU Community

Recommended Posts

well I put 80kmh because that is supposedly when hicas starts to operate

in high speed mode: it'll initially turn the rears opposite, to improve corner turn-in..

if you imagine the tail is stepping out, so to catch it, a natural reaction is to

catch it with opposite lock, and then that happens .. shades of a losing a rear

engine 911 at speed.

did nissan design for no power-on over steer, making the situation really

difficult to get into so you just resist the urge, and always steer always

where you wanna go?

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4437772
Share on other sites

i took my 32 gtr to wakefield and would have to say that cornering with the hicas in was diabolical on sweeping bends, it was unpredictable and inaccurate, it was like you started off with two wheel steer then all of a sudden the rear would fully engage the 1deg of steering angle which would upset the cars balance and direction, for this reason i have removed it!

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4438941
Share on other sites

Depends whether R32 or R33 and whether 4wd or 2wd. It hasn't been an issue with my R33 gtst - a touch of oppy lock many times around 100kph - no vague feeling - behaved almost like an AE86 or S14 (OK actually a fair bit better than S14)

Edited by simpletool
Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4442609
Share on other sites

Absolutely sucks.

Remove the HICAS and you will notice opposite lock at high wheels speeds is much nicer.

I removed mine because I like to get really sideways at skidpan and track days.. it is now a lot more predictable in ALL situations (putting around on the street aswell as beating up on it).

Here's where I finally managed to nail the middle turn but got on it a little too late coming out of the hairpin (carried it a bit wide).. with HICAS it wouldn't have been nearly as much fun :(

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4442814
Share on other sites

I've never had any problem when getting some opposite lock in the GTS4.

The warning I got about HICAS is that if you back off in a corner, HICAS will turn you around. If you keep the power feeding into the rear, you won't have any problems.

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4446990
Share on other sites

Maybe HICAS is a little more suited to the 4wd's, I hated it in my rwd and binned it as soon as I could.

For me, personally, I don't want any part of the car doing it's own thing.. it should only be reacting to my inputs, not what some computer thinks should be going on :D

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4447212
Share on other sites

Moneypit, what car do you have?

an r34 vspec ii, and considering whether to hicas lock bar it or leave it as is until I discover what it is like on the track.

"spirited" driving over the alpine pass i didn't have a problem with it, was just wondering if something nasty lurks at 10/10ths.

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4448798
Share on other sites

how much power have you got? are you an experienced track driver, or sort of starting out? what tyres are you using on track? they all make a difference. my advise is try it once with hicas still there. it wont kill you providing you know how to drive within your limits. if you don't like it, then get rid of it. most people that had really bad problems with hicas I would say had hicas that was not working properly and/or worn bushes in the rear end (there are plenty and most of them contribute to a vague feeling rear end). in my 32 GTR when it was working properly it was not a major problem. you get a feel for how to drive it pretty quickly, but it does add sometimes that feeling like the rear is just about to, or is slightly slipping when it's not, but like I said you learn to deal with it pretty quickly. once removed and providing everything else in the rear end is good basically you gain some predictability. if you like going to the track a lot, and end up with more power, and good competition tyres, and better suspension etc then sure, get rid of hicas. if the car is mostly a road car then it's not a big problem. especially if you have a fairly stock car power wise. you shouldn't be getting any power oversteer at 80km/h+ it just doesn't have enough power to do that (unless on purpose). slow speed stuff sure, but not the big stuff.

Link to comment
https://www.sau.com.au/forums/topic/257941-opposite-lock/#findComment-4449855
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...