Jump to content
SAU Community

Recommended Posts

i just sourced an r34 rb26 soo i will be selling/parting out my 607rwhp rb25 to upgrade to a big borgwarner turbo and 9k rpms big 280 cams single stage external oil pump etc etc but i have my tomei rods on my engine i know i can use but can i use my cp pistons from my rb25 on the 26?

Just looking at the ACL site, it shows that the RB25 / RB26 pistons are different in 2 areas:

Crown volume - RB26 = 16.3cc, RB25 = 11.5cc

Comp Height - RB26 = 30.3mm, RB25 = 31.3mm

I think the Comp Height difference means you will smash a RB25 piston into the head of a RB26, because the piston sits higher on the gudgeon pin / small end.

I would imagine most others are the same.

And RB265 / RB26 have different stroke, so you probably can't use the same rods either.

  blind_elk said:
Just looking at the ACL site, it shows that the RB25 / RB26 pistons are different in 2 areas:

Crown volume - RB26 = 16.3cc, RB25 = 11.5cc

Comp Height - RB26 = 30.3mm, RB25 = 31.3mm

I think the Comp Height difference means you will smash a RB25 piston into the head of a RB26, because the piston sits higher on the gudgeon pin / small end.

I would imagine most others are the same.

And RB265 / RB26 have different stroke, so you probably can't use the same rods either.

well your totally wrong about the rods they fit either engine, the rb26 has 2 more mm's of stroke but it has 1 mm less of compreson height, and the dome cc's compensate for the extra mm of stroke thats my theory ive talked to soem engine builders in the states and they told me ill be fine i entered all the calculations on my engine calculator shows 8.1 compresion just want to knwo if thiers something im missing or if thiers something that wont fit

  ReganGTS25T said:
well your totally wrong about the rods they fit either engine

Why ask if you're going to research and find the answer yourself???

  Quote
ive talked to soem engine builders in the states and they told me ill be fine

Big mistake.............Good luck! ;)

  Adriano said:
You cannot use the rb25 pistons in the 26, due to different deck height, comp height, gudgeon pin height.

I say we let him work it out himself as he's gotten some excellent advice................

  2LV8ETR said:
Why ask if you're going to research and find the answer yourself???

Big mistake.............Good luck! :(

I say we let him work it out himself as he's gotten some excellent advice................

we'll see, and if you look at my first post i never asked if my rods would fit i know my rods fit they are rb26 rods no brainer thier suposedly with a stock height head gasket and the 25 pistons i should be at 7.8 compresion and if you dont want to help me im prety sure thier are other people who know more then you on this forum :) to bad all my aussie freinds dont know crap about rb26's heh talkinga bout you antony 2rismo rezlo cjmark

  Guilt-Toy said:
oi.. Raegan is a cool dude. He has been through some bad shit more then most of us put together. Nothing wrong with Peru, i would go there.
  Quote
log on msnger fool i want to talk to you
  Quote
to bad all my aussie freinds dont know crap about rb26's heh
  Quote
well your totally wrong about the rods they fit either engine

lol he's TOTALLY wrong? heh ur arrogant..

Yup, a good bloke.........

He may have been through some shit man, but it doesn't excuse talking to people like shit trying to help him.

He's getting advice, he should be thankful and not take what he's being given for granted, even if his mates in the US know everything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...