Jump to content
SAU Community

Recommended Posts

i know everyone is haveing abit of shits and giggles but do you think the GTR will be doing a 2min 9 sec little bit more during the race or so a lap, the Evo's are doing 2:29's which isn't too bad considering the level or development that has gone into the V8's but 20 odd sec is a fair whack to make up.

Wonder what the GTR would actually do around Bathurst?

i know everyone is haveing abit of shits and giggles but do you think the GTR will be doing a 2min 9 sec little bit more during the race or so a lap, the Evo's are doing 2:29's which isn't too bad considering the level or development that has gone into the V8's but 20 odd sec is a fair whack to make up.

Wonder what the GTR would actually do around Bathurst?

just make sure it's not quite standard :) would be funny as to see the pace car overtaking the actualy race cars.

i know everyone is haveing abit of shits and giggles but do you think the GTR will be doing a 2min 9 sec little bit more during the race or so a lap, the Evo's are doing 2:29's which isn't too bad considering the level or development that has gone into the V8's but 20 odd sec is a fair whack to make up.

Wonder what the GTR would actually do around Bathurst?

There's an article on it in the current wheels magazine, where they compare the Supercars, 1991 R32 Grp A car and road version R35. And no, it's definitely not as quick as the race cars, but not as far off as you would think.

First official pics of R35 GT-R safety car released about 10 minutes ago. We have posted on the Tarmac magazine website, along with a mock-up of what it should have looked like! :D

Cheers,

Dean

Nissan unveils official safety car

http://www.tarmacmag.com.au/home.php

R35 in '1990 spec'

http://www.tarmacmag.com.au/news_detail.php?newsid=86

post-60515-1236133665_thumb.jpg

There's an article on it in the current wheels magazine, where they compare the Supercars, 1991 R32 Grp A car and road version R35. And no, it's definitely not as quick as the race cars, but not as far off as you would think.

Did they run the 35 with full slicks? Would be interesting to see the times if they did...

Suprised there's nothing on the roof!

BTW good on tarmac mag, actually running stories that are worth reading. I look forward to each new copy that comes out, its really filled the hole SPEED left

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...