Jump to content
SAU Community

Decided To Go Big Hp

passin ewe
 Share

Recommended Posts

passin ewe Proficient

passin ewe

Posted
Posted

I've decide to go big HP, so out with the current and in with the new. I'm putting a RB 25det into my C210 coupe, so now I'm selling my L28. This was a crate motor from Nismo about 10 years ago. It was freshened about 20,000 ks ago and I have paper work .

From Nismo it came with:

The motor is N42 on N42

Bored to 3.0L

East bear triple weber inlet manifold ( japanese)

East bear tuned length extractors " " "

Triple 45 webers made in Italy ( matching set DCOE)

Motor is in great condition and has good performance.

If need be I can put you in touch with the original owner /importer.

It's a shame most of you on this site are out of W.A but anyone local and interested is welcome to test at your convenience. Looking for about $3200 post-44326-1237038807_thumb.jpgpost-44326-1237038761_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/261118-decided-to-go-big-hp/
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted

you sure you want to go to a rb25???????

you can still get truckloads of power from a L28, seriously how much power are you after, and will you be able to use it too!

the L series is plenty capable of putting out 300rwkw and torque to match, plus its kinda retro and cool, as hardly anyone in oz does it!

but one factor does come into it, cost.

it is far cheaper to get the power etc out of a RB than an L series... i could get a 200kw 20det package for under 2 grand installed... but im not gunna as then there will be engineering bulshaet to sort out as im moving state like every few years

good luck with selling up, i know it would be sweet addition to anyones vehicle... maybe sign up to viczcar as they do a fair bit of stuff like that

passin ewe Proficient

passin ewe

Posted
  • Author
Posted

Mag86 I hear what your saying , but to get 300rwkw you'd be talking 3.1 stroker using the LD28 crank probably and they alone are fairly big bucks along with all the other performance parts for L series.I should have got in at the right time and bought up big from the states..I've thought about turbo L28 but again lots of changes to my motor ie: lowering compression, maybe change heads. I've seen some get up and go ones on YOU TUBE. What i do like about the RB 25 changeover is the power and driveability. I could drive this to work on a daily basis, meaning one less car to pay out for yearly. Bottom line is if I don't get an offer of at least $3000 I won't sell it. Instead I'll spend money and get the much needed LSD. I forgot to mention the motor will come with 2 x5 speed boxes. The one in the car and a spare.

Ghostrider Grand Master

Ghostrider

Posted
Posted

Mag86 I hear what your saying , but to get 300rwkw you'd be talking 3.1 stroker using the LD28 crank probably and they alone are fairly big bucks along with all the other performance parts for L series.I should have got in at the right time and bought up big from the states..I've thought about turbo L28 but again lots of changes to my motor ie: lowering compression, maybe change heads. I've seen some get up and go ones on YOU TUBE. What i do like about the RB 25 changeover is the power and driveability. I could drive this to work on a daily basis, meaning one less car to pay out for yearly. Bottom line is if I don't get an offer of at least $3000 I won't sell it. Instead I'll spend money and get the much needed LSD. I forgot to mention the motor will come with 2 x5 speed boxes. The one in the car and a spare.

Why are you guys all DREAMING?????

HP isn't the answer totally on it's own you know.

How would you like 380ft/lb of torque @ 4500 on less than 8.5psi of boost?????????

Cheers, D

noddle Rising Star

noddle

Posted
Posted (edited)
How would you like 380ft/lb of torque @ 4500 on less than 8.5psi of boost?????????

Cheers, D

I must say, turboing my N/A L24 has made a huge difference, it has a lot more torque, (above 1800 RPM)

it throws you back into the seats when you stick it into it,

the only down side is that, I need to be so much more careful in the wet, I can easily break tracking in 3rd, and that's a bit scary when you not expecting it (at 110Kmh)

Nigel

Edited by noddle
noddle Rising Star

noddle

Posted
Posted
sounds like fun!

I Had my son in with me, we were still tuning Megasquirt when this happened the first time, it gave me a big scare, I don't think my son was very impressed..

but I must say, I love the power now, comparing the power from the FI and turbo to my other 240K, it's a huge difference.

I now need to pull my finger out and build my L28 I have waiting.

Nigel

stagefumer11 Rising Star

stagefumer11

Posted
Posted
It's a N/A L28, but when I do it, It will be fitted with a turbo. I need to look into getting dished pistons for it

Nigel

Why do you want to dished pistons?. Flattops Have a better flame front.. Higher compression isnt a problem. Its all the the tune..

Btw, you dont need a 3.1L to make 300rwkw.. You can do 300rwkw on a Stock n42/n42 combo l28... You dont need the cubes for the power in the L Serries..

passin ewe Proficient

passin ewe

Posted
  • Author
Posted
Why do you want to dished pistons?. Flattops Have a better flame front.. Higher compression isnt a problem. Its all the the tune..

Btw, you dont need a 3.1L to make 300rwkw.. You can do 300rwkw on a Stock n42/n42 combo l28... You dont need the cubes for the power in the L Serries..

mmmm 300 rwkw you say out of an L28. Please exlpain, in detail as I'd like to know how without putting the LD28 in and so forth. Are we talking big PSI turbo or just a performance built carburettored L28. Would seriously like to knpw the formula for this kind of HP.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...